Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/10285
Título : Desarrollo de un prototipo de andador-exoesqueleto de 6 grados de libertad para la rehabilitación física de miembros inferiores en infantes dentro del Grupo de Investigación en Bioingeniería GIEBI.
Autor : Maldonado Ibarra, Galo Eduardo
Director(es): Pérez Bayas, Miguel Ángel
Tribunal (Tesis): Novillo Andrade, Geovanny Guillermo
Escobar Guachambala, Miguel Ángel
Palabras claves : TECNOLOGÍA Y CIENCIAS DE LA INGENIERÍA;ROBÓTICA;EXOESQUELETO;SISTEMAS DE CONTROL;MARCHA HUMANA;REHABILITACIÓN FÍSICA
Fecha de publicación : mar-2019
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Maldonado Ibarra, Galo Eduardo. (2019). Desarrollo de un prototipo de andador-exoesqueleto de 6 grados de libertad para la rehabilitación física de miembros inferiores en infantes dentro del Grupo de Investigación en Bioingeniería GIEBI. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTIPEC;20T01181
Abstract : This following investigation´s objective: to, details the development of a prototype walker exoskeleton of six degrees of freedom for the physical rehabilitation of lower limbs within the Group of Research and Studies in Bioengineering the GIEBI, of the Facultad de Mecánica de la Escuela Superior Politécnica de Chimborazo. The walker design was made using CAD software and then it was physically implemented. With this base, the investigation begins, selecting the actuators (motors), controllers (HYDIV268M-5A) and the programmable development card (Raspberry PI 2). It was necessary to know the maximum and minimum limits of the movements of the human lower extremities, it was recommended in the specialized bibliography, so that the articulations of the exoskeleton can make them, so it being able to find their final position by means of the equation obtained from the direct kinematic analysis. The programming in the Raspberry is written in the Python language and a means of communication between the user and the mechanism is created with interface development software, which allows the system to start and shut down, as well as the calibration of the angles of the joints. The job culminates with integration of mechanical and electronic systems, then vacuum tests were performed with angles recommended by the physiotherapist whose results are purchased with a simulation of the human gait executed in a videogrammetry software, obtaining an acceptable error of 4% data that is verified with a probability test, showing that the angles assigned in the system allow the human march.
Resumen : La presente investigación, detalla el desarrollo de un prototipo de andador exoesqueleto de seis grados de libertad para la rehabilitación física de miembros inferiores dentro del Grupo de Investigación y Estudios en Bioingeniería (GIEBI), de la Facultad de Mecánica de la Escuela Superior Politécnica de Chimborazo. El diseño del andador se lo realizó mediante un software CAD y luego fue implementado físicamente. Con esta base, comienza la investigación, seleccionando los actuadores (motores), controladores (HY-DIV268M-5A) y la tarjeta de desarrollo programable (Raspberry PI 2). Fue necesario conocer los límites máximos y mínimos de los movimientos de las extremidades inferiores humanas, recomendados en la bibliografía especializada, para que puedan efectuarlos las articulaciones del exoesqueleto, pudiéndose hallar su posición final mediante las ecuaciones obtenidas del análisis cinemático directo. La programación en el Raspberry se escribe en el lenguaje Phyton y se crea un medio de comunicación entre el usuario y el mecanismo con un software de desarrollo de interfaz, que permite el inicio y apagado del sistema, como también la calibración de los ángulos de las articulaciones. El trabajo culmina con la integración de los sistemas mecánicos y electrónicos, posteriormente se realizó pruebas en vacío con ángulos recomendados por el fisioterapeuta cuyos resultados se comparan con una simulación de la marcha humana ejecutada en un software de videogrametría, obteniendo un error aceptable del 4%, dato que se verifica con un test de probabilidad, demostrando que los ángulos asignados en el sistema permiten ejecutar la marcha humana.
URI : http://dspace.espoch.edu.ec/handle/123456789/10285
Aparece en las colecciones: Maestrias: Modalidad Proyectos de Investigación y Desarrollo

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
20T01181.pdf3,29 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons