Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/1161
Título : Análisis, diseño y construcción de un módulo de control de temperatura para el laboratorio de la EIE-CRI de la ESPOCH.
Autor : Carpio Velasco, Francisco Javier
Barahona Matute, Pablo Luciano
Director(es): Guevara, Pablo
Tribunal (Tesis): Romero, Paúl
Palabras claves : CONTROL DE TEMPERATURA;EQUIPO DIDACTICO;LABORATORIO DE CONTROL INDUSTRIAL ESPOCH.;MANUALES DE PRÁCTICAS DE LABORATORIO;PRACTICAS DE ELECTRONICA;PROCESO DE ENSEÑANZA - APRENDIZAJE;SISTEMAS ELECTRONEUMATICOS
Fecha de publicación : jul-2011
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Carpio Velasco, Francisco Javier; Barahona Matute, Pablo Luciano. (2011). Análisis, diseño y construcción de un módulo de control de temperatura para el laboratorio de la EIE-CRI de la ESPOCH. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTFIYE;108T0004
Abstract : We performed the analysis, design and construction of a temperature control module for the control laboratory of the School of Engineering in Electronics in Control and Industrial Networks of ESPOCH. In the research we apply the analytical method that starts from the identification of the problem, its approach, the formulation of the hypothesis and its subsequent application. The materials used for the realization of the temperature module in its mechanical part of a fiber and glass furnace, an electrical resistance of 500 watts of power, a control panel where are the power supplies, and lights Type of alarm Red and green in the part of the cooling system with solenoid valve, pressure regulator, a double-acting cylinder and a pneumatic air shower, has a Pt-100 sensor and a K-type thermocouple to measure Temperature, In addition, a Wheastone bridge is available for signal conditioning. The software used for the interface is LabVIEW® 8.10, as well as a data acquisition card NI my DAQ in charge of communication between the control interface and the electric oven. The results obtained in the temperature module show that they have a 98% stability for what indicates that it is a very reliable system, in addition to the very fast response times to reach and maintain the desired set point, to control the temperature variable . The construction of the temperature module is an important contribution to students' learning in the field of industrial control. It allows observing the use of different temperature sensors and actuators, their wiring and programming in the software. In addition, it is a clear tool of the simulation of processes existing in the real industry thus achieving that the technical level acquired by students in the course of their career is strengthened. It is recommended to integrate the didactic module of temperature control in the materials of instrumentation, sensors and control systems.
Resumen : Se realizó el análisis, diseño y construcción de un módulo de control de temperatura para el laboratorio de control de la Escuela de Ingeniería en Electrónica en Control y Redes Industriales de la ESPOCH. En la investigavión aplicamos el método analítico que parte de la identificación del problema, su planteamiento, la formulación de la hipótesis y su posterior aplicación. Los materiales utilizados para la realizión del módulo de temperatura consta en su parte mecánica de un horno de tol y fibra de vidrio, de una resistencia eléctrica de 500 watts de potencia, un panel de control donde se encuentran ubicadas las fuentes de alimentacion, y luces piloto tipo alarma de color rojo y verde, dentro de la parte del sistema de enfriamiento tenemos electroválvula, regulador de presión, un cilíndro de doble efecto y una ducha de aire neumatica, dispone de un sensor Pt-100 y una termocupula tipo K para medir la temperatura, además se dispone de un puente de Wheastone para el acondicionamiento de la señal. El software utilizado para la interfaz es LabVIEW® 8.10, así como una tarjeta de adquisición de datos NI my DAQ encargada de realizar la comunciación entre la interfaz de control y el horno eléctrico. Los resultados obtenidos en el módulo de temperatura demuestran que presenta un 98% de estabilidad lo que indica que es un sistema bastante confiable, además presenta tiempos de respuesta muy rápidos para alcanzar y mantener el punto de consigna deseado, logrando controlar la variable de temperatura. La construcción del módulo de temperatura constituye un importante aporte para el aprendizaje de los estudiantes en el campo del Control Industrial. Permite observar la utilizacion de diferentes sensores de temperatura y actuadores, su cableado y programación en el software. Además, es una herramienta clara de simulación de procesos existentes en la industria actual logrando así que el nivel técnico adquirido por los estudiantes en el transcurso de su carrera se encuentre fortalecido. Se recomienda integrar el módulo didáctico de control de temperatura en las materias de instrumentación, sensores y sistemas de control.
URI : http://dspace.espoch.edu.ec/handle/123456789/1161
Aparece en las colecciones: Ingeniero en Electrónica, Control y Redes Industriales; Ingeniero/a en Electrónica y Automatización

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
108T0004.pdf1,49 MBAdobe PDFVista previa
Visualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.