Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/14339
Título : Determinación de una función de ahusamiento para el cálculo volumen en plantaciones de Pinus radiata pertenecientes a la empresa Aglomerados Cotopaxi S.A., cantón Latacunga, provincia de Cotopaxi.
Autor : Tapia Oviedo, Esthefanny Mariela
Director(es): Salazar Castañeda, Eduardo Patricio
Tribunal (Tesis): Limaico Nieto, Cecilia Teresa
Palabras claves : SILVICULTURA;PLANTACIONES FORESTALES;ESPECIES FORESTALES MADERABLES;PRODUCTOS MADERABLES;PINO (Pinus radiata)
Fecha de publicación : 19-nov-2019
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Tapia Oviedo, Esthefanny Mariela. (2019). Determinación de una función de ahusamiento para el cálculo volumen en plantaciones de Pinus radiata pertenecientes a la empresa Aglomerados Cotopaxi S.A., cantón Latacunga, provincia de Cotopaxi. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTFRN;33T00238
Abstract : The present information proposes: to model the tapering of Pinus radiata in plantations belonging to the company Aglomerados Cotopaxi S.A, located in Latacunga canton, Cotopaxi province; the term tapering is defined as the change in diameter as the tree height increases from the stump. In order to describe this variation and quantify the sections of standing trees shaft, mathematical functions have been used, which constitute a flexible statistical tool to process data and determine wood stocks and timber products. The sample corresponds to 40 individuals of different ages of the Pinus radiata species; 4 compatible taper-volume functions were tested in the prediction of stem diameters and commercial volumes, whose adjustments were by linear and non-linear regression. The evaluation and selection of the most appropriate functions was based on fitting goodness statistical indicators, in addition to a graphical analysis. Given the predictive capacity shown by the "TapeR" function, this proved to be the most appropriate to describe the shaft profile and determine the distribution of timber products at a desired height and tip diameter. The function that presented the best results when estimating the trees volume, obtaining in the coefficient of determination R2 almost the value of 100%%, presenting the best fit. While all three functions have demonstrated proper, "TapeR" 2 minimizes errors, which is also reflected on the root of the mean square error, where the function with the lowest value is adequate to the "TapeR 2" function.
Resumen : La presente información propone: modelar el ahusamiento de Pinus radiata en plantaciones pertenecientes a la empresa Aglomerados Cotopaxi S.A, ubicadas en el cantón Latacunga, provincia de Cotopaxi; el término ahusamiento se define como el cambio del diámetro conforme aumenta la altura del árbol a partir del tocón. Para describir esta variación y cuantificar las secciones del fuste de árboles en pie, se han utilizado funciones matemáticas, los cuales constituyen una herramienta estadística flexible para procesar datos y determinar existencias y productos maderables. La muestra corresponde a 40 individuos de diferentes edades la especie Pinus radiata; se probaron 4 funciones compatibles de ahusamiento-volumen en la predicción de diámetros fustales y volúmenes comerciales, cuyos ajustes fueron por regresión lineal y no lineal. La evaluación y selección de las funciones más apropiadas se hizo con base en indicadores estadísticos de bondad de ajuste, además de un análisis gráfico. Dada la capacidad predictiva de la función "TapeR", esta resultó ser la más adecuado para describir el perfil del fuste y determinar la distribución de productos maderables a un diámetro de punta y altura desdados. La función que presentó los mejores resultados a la hora de estimar el volumen de los arboles. obteniendo en el coeficiente de determinación R2 casi el valor de 100% presentando el mejor ajuste. Si bien las tres funciones presentan buenos, "TapeR 2" minimiza los errores. lo cual también se ve reflejado en la raíz del error cuadrático medio, donde la función con el menor valor es el de la función "TapeR 2".
URI : http://dspace.espoch.edu.ec/handle/123456789/14339
Aparece en las colecciones: Ingeniero/a Forestal

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
33T00238.pdf1,81 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons