Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/16385
Título : Evaluación de tres tipos de injerto de nuez (Juglans regia L.) en cuatro progenies de nogal (Juglans neotrópica Diels.) en la estación experimental Tunshi.
Autor : Chimbolema Guacho, Cristian Edison
Director(es): León Ruiz, Juan Eduardo
Tribunal (Tesis): Castro Gómez, Rosa del Pilar
Palabras claves : TECNOLOGÍA Y CIENCIAS AGROPECUARIAS;AGRONOMÍA;INJERTO;PROGENIE;PUA LATERAL;PUA TERMINAL
Fecha de publicación : 14-sep-2021
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Chimbolema Guacho, Cristian Edison. (2021). Evaluación de tres tipos de injerto de nuez (Juglans regia L.) en cuatro progenies de nogal (Juglans neotrópica Diels.) en la estación experimental Tunshi. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTFRN;13T00950
Abstract : This research aims to evaluate three types of grafting of walnut (Juglans regia L.)in four progenies of walnut tree (Juglans neotropica Diels) in the experimental station Tunshi. The grafting was done by applying three types of graft: terminal scion, lateral scion, and omega type graft, by using grafting plants propagated and identified as walnut tree from seeds collected in Riobamba, Guamote, Alausí and Pallatanga, likewise the grafted material identified as walnut was obtained from mother plants in production and it presented wellformed buds and about sprouting. Beds were made under level to facilitate the work of irrigation. The grafting was carried out after having made distribution of the progenies, and the type of graft with a complete randomized design obtaining 12 treatments with 5 replicates and 60 experimental units. After performing the grafting variables to be evaluated as the number of buds, days until the appearance of the first leaves, shoot length, number of leaves, diameter of the rootstock, diameter of the graft variables to be and percentage of budding were considered. By carrying out the analysis of variance and by finding significant differences among the variables of study the Tukey test at 5% was carried out for the separation of averages. It is concluded that the Riobamba progeny with lateral and terminal scion graft type was the most efficient type of graft to produce walnut with the best agronomic characteristics. It is recommended to carry out grafts of lateral and terminal scion type since they presented better results in the growth and budding, and to consider the cold hours to which the rods of grafting were subjected.
Resumen : El objetivo de la investigación fue evaluar tres tipos de injerto de Nuez (Juglans regia L.) en cuatro progenies de nogal (Juglans neotropica Diels) en la estación experimental Tunshi, la injertación se realizó aplicando tres tipos de injerto: púa terminal, púa lateral e injerto tipo omega, utilizando plantas porta injerto propagadas e identificadas como nogal provenientes de semillas recolectadas en Riobamba, Guamote, Alausí y Pallatanga, así mismo el material injertado identificado como nuez fue obtenido de plantas madres en producción, y este presento yemas bien formadas y apunto de brotar. Se realizaron camas bajo nivel para facilitar la labor de riego. La injertación se llevó a cabo luego de haber realizado la distribución de las progenies y el tipo de injerto con un diseño completo al azar obteniendo un total de 12 tratamientos con 5 repeticiones y 60 unidades experimentales. Luego de haber realizado la injertación se tomaron en cuenta variables a evaluar como el número de yemas, días hasta la aparición de las primeras hojas, longitud del brote, numero de hojas, diámetro del patrón, diámetro del injerto y porcentaje de prendimiento. Al realizar el análisis de varianza y encontrar diferencias significativas entre las variables en estudio, se realizó la prueba de Tukey al 5% para la separación de medias. Se concluye que la progenie Riobamba con injerto de tipo púa lateral y terminal, fue el tipo de injerto más eficientes para la producción de nuez evidenciando tener las mejores caracterizas agronómicas. Se recomienda realizar injertos de tipo púa lateral y terminal por que presentaron mejores resultados en el crecimiento y prendimiento además considerar las horas frio a las cuales fueron sometidas las varetas a injertar.
URI : http://dspace.espoch.edu.ec/handle/123456789/16385
Aparece en las colecciones: Ingeniero/a Agrónomo/a

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
13T00950.pdf2,26 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons