Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/16780
Título : Obtención de bioplástico a partir del mucílago de cactus (Opuntia ficus-indica) para uso como envolturas alimenticias
Autor : Pazmiño Abad, Katherine Gabriela
Director(es): Chuiza Rojas, Marco Raúl
Tribunal (Tesis): Brito Moina, Hannibal Lorenzo
Palabras claves : TECNOLOGÍA Y CIENCIAS DE LA INGENIERÍA;INGENIERÍA QUÍMICA;CACTUS (Opuntia ficus indica);BIOPLÁSTICO;POLISACÁRIDOS;GRENETINA;BIODEGRADABILIDAD
Fecha de publicación : 24-ago-2021
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Pazmiño Abad, Katherine Gabriela. (2021). Obtención de bioplástico a partir del mucílago de cactus (Opuntia ficus-indica) para uso como envolturas alimenticias. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTFC;96T00694
Abstract : This investigation work objective deals with the elaboration of a bioplastic from the cactus stalk mucilage (Opuntia ficus indica) to be used as food wrapping, starting with the physical, chemical and microbiological characterization of the row material; later the mucilage extraction was carried out through the guidelines described by the United States Organization for Food and Agriculture(FAO), based on the 2k experimental design ( with to variables, velocity and time, obtaining six treatments with four replications each); for this, 500ml water per each sample were used to determine the best yield. Then the proximal analysis was used on the basis of the INEN 1456, E INEN 0401 norm as well as the Kjeldahl and Erlenmeyer method. Moreover, the bioplastic obtainment was carried out using four treatments in each one of them varied mucilage concentrations were used (73.53% y 74.01%) and one protein (11.76% and 12.01%), with vinegar, glycerin constant concentrations for equal temperature and time. The best bioplastic is the T3, as it presented the best physical, chemical and microbiological characteristics, 0.17mm width, 28.94% humidity percentage, 47,16 % solubility, 0,0316 g/h.m.*MPa permeability, 65.00% elongation percentage with 5.30N maximum load. The biodegradation of the bioplastics was carried out in three different environments (water, earth, environment). In water they decompose in 24 days, in earth in 20 days and in the environment, they decompose in 34 days.
Resumen : Este trabajo de investigación tiene como objetivo la elaboración de un bioplástico a partir del mucílago de las pencas del cactus opuntia ficus indica para la utilización como envoltura de alimentos, iniciando con la caracterización físico química y microbiológica de la materia prima, posteriormente se procedió con la extracción del mucílago, mediante la guía descrita por la Organización de las Naciones Unidas para la Agricultura y la Alimentación (FAO), en base al diseño experimental 2k (con dos variables la velocidad y el tiempo, obteniendo 6 tratamientos con 4 repeticiones cada una), para lo cual, se utilizó 500 ml de agua para cada muestra, con el fin de determinar el mejor rendimiento, luego se realizó el análisis proximal en base la norma INEN 1456, NTE INEN 0401, y el método Kjeldahl y Erlenmeyer. A continuación, se procedió a la obtención de los bioplásticos utilizando cuatro tratamientos, cada uno de ellos se utilizó concentraciones variadas de mucílago (73.53% y 74.01%) y una proteína (11.76% y 12.01%), con concentraciones constantes de vinagre, glicerina, para iguales temperatura y tiempo. El bioplástico más optimo es el T3, ya que presento las mejores características físico químicas y microbiológicas, un espesor del 0.17 mm, un porcentaje de humedad de 28.94%, una solubilidad de 47,16 %, una permeabilidad de 0,0316 g/h.m. MPa, con un porcentaje de elongación 65.00%, con una carga máxima de 5.30 N, la biodegradación de los bioplásticos se realizó en tres medios diferentes; (agua, tierra, ambiente). En agua se descomponen 24 días, en tierra 20 días y al ambiente se descomponen en 34 días.
URI : http://dspace.espoch.edu.ec/handle/123456789/16780
Aparece en las colecciones: Ingeniero/a Químico/a

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
96T00694.pdf3,17 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons