Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/22228
Título : Evaluación Forrajera De Una Mezcla De Pastos Con La Aplicación Foliar De Humus Líquido Mas Titanium Micro En La Empresa Exibal
Autor : Aucancela Guanoquiza, Yadira Nathaly
Director(es): Fiallos Ortega, Luis Rafael
Tribunal (Tesis): Villafuerte Gavilánez, Alex Arturo
Palabras claves : MICROELEMENTOS;FASE DE PRODUCCIÓN;LÍNEA LOHMANN BROWN;REGISTROS DE PRODUCCIÓN;CONVERSION ALIMENTICIA
Fecha de publicación : 10-abr-2024
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Aucancela Guanoquiza, Yadira Nathaly. (2024). Evaluación Forrajera De Una Mezcla De Pastos Con La Aplicación Foliar De Humus Líquido Mas Titanium Micro En La Empresa Exibal. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTFCP;17T02001
Abstract : The objective was to evaluate the effect of liquid humus plus Titanium Micro on the behavior productive of a forage mixture of Alfalfa, Ray Grass, White Clover and forage plantain in the Exibal company, in the province of Chimborazo, Chambo canton, the same one that lasted of 60 days, this was evaluated under a completely randomized block design, using 20 plots 15 m2, 4 T0 treatments (control); T1. Humus L. (800 lt/ha) + Titanium Micro (0.75 kg/ha); T2 Humus L. (1000 lt/ha) + Titanium Micro (1.00 kg/ha); T3 Humus L. (1200 lt/ha) + Titanium Micro (1.25 kg/ha), with 5 repetitions. The experimental measurements allowed us to obtain the following results: the best pre-flowering time in the first and second evaluation was given when fertilizing with (T3) 1200 lt of humus plus 1.25kg/ha of Titanium micro obtaining a pre-flowering at 23.50 days. In the case of basal coverage for the first evaluation, with T2 29.20 and second evaluation with T1 34.88% basal coverage. For air coverage With T2 for the first cut, 72.44 was recorded and in the second evaluation 98% aerial coverage. The highest number of leaves/stem of forage in the first and second evaluation, 21.60 and 29.60 leaves/stem occurred with the application with treatment T2 and T3 respectively. In the number of Stem/plant for the first and second application, 12.80 and 13.80 were obtained with the treatments T1 and T0. The highest production of green forage in the first cut 23.28 Tn/Fv/Ha/cut with the T1 in the second cut the highest production occurred with T2 27.48 Tn/Fv/Ha/cut. For the dry matter production in the first cut 8.27 Tn/Ms/Ha/cut and in the second evaluation reached 6.50 Tn/Ms/Ha/cut with the application of the T1 treatment in both cases. Finally, In the economic analysis, the best benefit/cost was with treatment T2, registering 1.99 in the second evaluation.
Resumen : El objetivo fue evaluar el efecto del humus líquido más Titanium Micro en el comportamiento productivo de una mezcla forrajera de Alfalfa, Ray Grass, Trébol blanco y llantén forrajero en la empresa Exibal, en la provincia de Chimborazo, cantón Chambo, la misma que tuvo una duración de 60 días, esta se evaluó bajo un diseño de bloque completamente al azar, utilizando 20 parcelas de 15 m2, 4 tratamientos T0 (testigo); T1. Humus L. (800 lt/ha) + Titanium Micro (0,75 kg/ha); T2 Humus L. (1000 lt/ha) + Titanium Micro (1,00 kg/ha); T3 Humus L. (1200 lt/ha) + Titanium Micro (1,25 kg/ha), con 5 repeticiones. Las mediciones experimentales permitieron obtener los siguientes resultados: el mejor tiempo de prefloración en la primera y segunda evaluación se dio al fertilizar con (T3) 1200 lt de humus más 1,25kg/ha de Titanium micro obteniendo una prefloración a los 23,50 días. En el caso de la cobertura basal para la primera evaluación se obtuvo con el T2 29,20 y segunda evaluación con el T1 34,88 % cobertura basal. Para la cobertura aérea con el T2 para el primer corte se registró 72,44 y en segunda evaluación 98% de cobertura aérea. El mayor número hojas/tallo de forraje en la primera y segunda evaluación, 21,60 y 29,60 hojas/tallo se dio con la aplicación con el tratamiento T2 y T3 respectivamente. En el número de Tallo/planta para la primera y segunda aplicación se obtuvo 12,80 y 13,80 con los tratamientos T1 y T0. La mayor producción de forraje verde en el primer corte 23,28 Tn/Fv/Ha/corte con el T1 en el segundo corte la mayor producción se dio con el T2 27,48 Tn/Fv/Ha/corte. Para la producción de materia seca en el primer corte 8,27 Tn/Ms/Ha/corte y en la segunda evaluación se alcanzó 6,50 Tn/Ms/Ha/corte con la aplicación del tratamiento T1 en ambos casos. Finalmente, en el análisis económico el mejor beneficio/costo se dio con el tratamiento T2 registrando 1,99 en la segunda evaluación.
URI : http://dspace.espoch.edu.ec/handle/123456789/22228
Aparece en las colecciones: Ingeniero/a Zootécnista

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
17T02001.pdf2,01 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons