Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/2510
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorBrito, Hanníbal-
dc.contributor.authorAdriano Yubailli, Sandra Isabel-
dc.date.accessioned2013-07-18T17:21:59Z-
dc.date.available2013-07-18T17:21:59Z-
dc.date.issued2013-07-18T17:21:59Z-
dc.identifier.citationAdriano Yubailli, Sandra Isabel. (2013). Diseño y construcción de una torre de destilación con rectificación para la purificación de Thinner usado procedente de las mecánicas de automóviles. Escuela Superior Politécnica de Chimborazo. Riobamba.es_ES
dc.identifier.urihttp://dspace.espoch.edu.ec/handle/123456789/2510-
dc.descriptionEl objetivo de esta investigación es el Diseño y Construcción una Torre de Destilación con Rectificación para la purificación del thinner usado procedente de las mecánicas automotrices de la Ciudad de Ambato, mismo que será ubicado en el Laboratorio de Operaciones Unitarias, Escuela de Ingeniería Química, Facultad de Ciencias de la Escuela Superior Politécnica de Chimborazo. El dimensionamiento del equipo se realizó a través de cálculos de ingeniería a partir de datos experimentales y variables de proceso obtenidas en ensayos de laboratorio en base al proceso de destilación simple y a la NTE 2163:99. El equipo está construido de acero inoxidable AISI 304, con dos condensadores, un deflemador, una columna de platos cilíndrica, tuberías y tanques de almacenamiento para la alimentación y destilado, utilizando GLP como fuente de calor. Lográndose la obtención del 80% de thinner recuperado, 15% de residuo (pintura) y un 5% de solventes volátiles que al ser sometidos al proceso de destilación no lograron condensarse en su totalidad; además presenta un 93% de eficiencia en el equipo, dicho valor se alcanzó en función de la viscosidad y la volatilidad relativa que este presenta. Se concluye que con la construcción del equipo se recuperará un solvente puro, el cual, puede ser utilizado en otros fines dentro de las mecánicas automotrices disminuyendo costos de producción; igualmente permitirá realizar prácticas de laboratorio contribuyendo al desarrollo tecnológico estudiantil, así como la disminución de la contaminación Ambiental. Se recomienda que las mecánicas automotrices realicen un control del manejo de residuos sólidos y líquidos para reducir la contaminación que estos provocan al ambiente y proceder con el trámite para la consecución de la Licencia Ambiental.es_ES
dc.description.abstractThe objective of this research is the Design and Construction of a Distillation Tower with Rectification for the purification of the used thinner coming from the automotive mechanics of the city of Ambato, which will be located in the Laboratory of Unit Operations, School of Chemical Engineering, Faculty of Sciences of the Polytechnic School of Chimborazo. The sizing of the equipment was made through engineering calculations based on experimental data and process variables obtained in laboratory tests based on the simple distillation process and NTE 2163:99. The equipment is built in AISI 304 stainless steel, with two condensers, a deflator, a cylindrical plate column, piping and storage tanks for feeding and distillation, using LPG as heat source. Achieving the obtaining of 80% of recovered thinner, 15% of residue (paint) and 5% of volatile solvents that when submitted to the distillation process were not condensed in its totality; it also presents a 93% of efficiency in the equipment, this value was reached in function of the viscosity and the relative volatility that this one presents. It is concluded that with the construction of the equipment a pure solvent will be recovered, which can be used for other purposes within the automotive mechanics, reducing production costs; it will also allow laboratory practices contributing to the technological development of students, as well as the reduction of environmental pollution. It is recommended that the automotive repair shops control the management of solid and liquid waste in order to reduce the contamination they cause to the environment and proceed with the process to obtain an environmental license.es_ES
dc.language.isospaes_ES
dc.publisherEscuela Superior Politécnica de Chimborazoes_ES
dc.relation.ispartofseriesUDCTFC;96T00192-
dc.rightsinfo:eu-repo/semantics/openAccesses_ES
dc.subjectPURIFICACIÓN DEL THINNERes_ES
dc.subjectDISEÑO DE TORRES DE DESTILACIÓNes_ES
dc.subjectTALLERES AUTOMOTRICESes_ES
dc.subjectCONSTRUCCIÓN DE TORRES DE DESTILACIÓNes_ES
dc.titleDiseño y construcción de una torre de destilación con rectificación para la purificación de Thinner usado procedente de las mecánicas de automóvileses_ES
dc.typebachelorThesises_ES
dc.contributor.miembrotribunalSánchez, Gonzálo-
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
Aparece en las colecciones: Ingeniero/a Químico/a

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
96T00192.pdf4,21 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons