Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/2650
Título : Diseño de un Sistema de Tratamiento de Agua Residual del Proceso de Pelambre para su Reutilización, Curtiembre Pieles Puma
Autor : Tayupanda Pagalo, Segundo Juan
Director(es): Villacrés, Mario
Tribunal (Tesis): Sánchez, Gonzálo
Usiña, José
Palabras claves : CURTICIÓN DE PIELES;RIESGOS EN EL TRABAJO;REUTILIZACIÓN DE AGUAS RESIDUALES;DISEÑO DE SISTEMAS DE TRATAMIENTO DE AGUAS RESIDUALES;EMPRESA DE CURTIEMBRE PIELES PUMA S.A. [Ambato, prov. Tungurahua];PROCESOS DE PELAMBRE [Curtición de pieles]
Fecha de publicación : 30-jul-2013
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Tayupanda Pagalo, Segundo Juan. (2013). Diseño de un Sistema de Tratamiento de Agua Residual del Proceso de Pelambre para su Reutilización, Curtiembre Pieles Puma. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTFC;96T00123
Abstract : The objective of the research is the design of a wastewater treatment system of the liming process for its reuse in the leather tannery "Puma", in the city of Ambato, Province of Tungurahua. Physical-chemical studies were carried out for the diagnosis of the wastewater from the liming process, determining that this water is rich in sulfides (1427 mg/L) and calcium hydroxide, suitable for reuse in another batch of liming, it was determined that the concentration of organic matter and sulfur reached critical levels of toxicity. A sequential treatment system was selected: filtration, decantation and reuse of the effluent, by means of primary unitary operations, it was achieved that the fluents have characteristics for their recycling, reaching the necessary concentrations for a new batch of liming. The design of the system was based on the discharge flow rate of the fulon. The sizing of the system consists of: a stainless steel grid a concrete tank for the collection of effluent with a capacity of 7.0 cubic meters a decanter type cylinder - conical with a capacity of 7.0 cubic meters. A concrete tank for the collection of the treated effluent coming from the decanter with the same characteristics of the previous tank. Pumping equipment for the transportation of the effluent from tank 1 to the decanter, and from tank 2, to the fulon capacity. With the design of the treatment system for the reuse of water from the pelambre, a reduction of environmental pollution and economic savings for the company is achieved. The construction of the system is recommended to take advantage of the high concentration of sulfur, lime and water, which are reusable.
Resumen : El objetivo de la investigación es el diseño de un sistema de tratamiento de aguas residual del proceso de pelambre para su reutilización en la curtiembre pieles "Puma", de la Ciudad de Ambato Provincia de Tungurahua. Se realizo estudios Físico-quimico para el diagnóstico del agua residual del proceso de pelambre, determinando que esta agua es rica en sulfuros (1427 mg/L) e hidroxido de calcio, apta para la reutilización en otra tanda de pelambre, se determinó que la concentración de materia orgánica y sulfuro alcanzan niveles críticos de toxicidad. Se selecciona un sistema de tratamiento secuencial: filtración, decantación y reutilización del efluente, mediante operaciones unitarias primarias, se consiguió que los fluentes cuenten con características para el reciclaje de los mismos, alcanzando las concentraciones necesarias para una nueva tanda de pelambre. El diseño del sistema se realizó en base al caudal de descarga del fulón. El dimensionamiento del sistema consta de: una rejilla de acero inoxidable un tanque de hormigón para la recolección de efluente con una capacidad de 7.0 m. cubicos un decantador tipo cilindro - cónico de capacidad de 7 m. cubicos. Un tanque de hormigón para la recolección del efluente tratada proveniente del decantador de las mismas caracteristicas del tanque anterior. Equipo de bombeo para la Transportación del efluente desde el tanque 1 al decantador, y del tanque 2, al fulón de capacidad. Con el diseño del sistema de tratamiento, para la reutilización del agua del pelambre se logra una reducción de la contaminación ambiental y un ahorro económico para la empresa. Se recomienda la construcción del sistema, para aprovechar la alta concentración de sulfuro,cal y agua, que son reutilizables.
URI : http://dspace.espoch.edu.ec/handle/123456789/2650
Aparece en las colecciones: Ingeniero/a Químico/a

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
96T00123.pdf1,18 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons