Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/3110
Título : Estudio químico de la presencia de montmorillonita en arcillas de la cuenca sedimentaria miocénica de Loja mediante técnicas de espectroscopía
Autor : Cadena Nogales, Ana Cristina
Director(es): Cazar, Robert
Tribunal (Tesis): Pilamunga, Carlos
Palabras claves : ESPECTROSCOPÍA MOLECULAR;ARCILLAS;PROVINCIA DE LOJA;MONTMORILLONITA [Mineral, grupo silicatos];CUENCA SEDIMENTARIA MIOCÉNICA [Prov. Loja]
Fecha de publicación : 5-feb-2014
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Cadena Nogales, Ana Cristina. (2014). Estudio químico de la presencia de montmorillonita en arcillas de la cuenca sedimentaria miocénica de Loja mediante técnicas de espectroscopía. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTFC;96T00229
Abstract : Seventeen clay samples from the polygon of the Miocene sedimentary basin of Loja were characterized chemically and by means of molecular spectroscopy techniques to determine if they contain any percentage of montmorillonite. The interest of establishing its existence lies in the fact that by knowing its chemical properties, applications can be potentiated. The samples were collected by geology and mining engineers (Universidad Técnica Particular de Loja, UTPL). A specific surface analysis was carried out, using the methylene blue test (MBT), after which organic matter was removed, silt (> 4 µm) and clay (= 4µm) fractions were separated and carbonates were removed (purification of the samples) in the Instrumental Analysis laboratories (Faculty of Sciences, ESPOCH) and in the departments of the University of Loja (UTPL), ESPOCH) and the Departments of Geology and Mines and Civil Engineering (UTPL). The purified samples were subjected to X-ray diffraction analysis to qualitatively and quantitatively define their phases (EVA and TOPAS software). X-ray fluorescence analyses were performed to determine their chemical and elemental composition. Using the values of specific surface area and clay fraction, the percentage of montmorillonite was estimated, which follows a similar trend to that established by X-ray diffraction, thus verifying the results.13 of the 17 samples analyzed were established to be montmorillonites, for each sample the corresponding polygon point was indicated and the percentage of clay and montmorillonite was compared, facilitating later analyses of exploitation efficiency. In conclusion, sample 1 from point 2 (P1M2) contains more clay and sample 2 from point 9 (P9M2) less. Sample 2 of point 4 (P2M4) has a higher percentage of montmorillonite and sample 1 of point 2 (P2M1) a lower one. In the case of material characterization, it is recommended to perform complementary analyses in order to verify the results.
Resumen : Se caracterizaron químicamente y mediante técnicas de espectroscopía molecular diecisiete muestras de arcilla provenientes del polígono de la cuenca sedimentaria miocénica de Loja, para conocer si tienen algún porcentaje de montmorillonita. El interés de establecer su existencia radica en que conociendo sus propiedades químicas, se puede potencializar aplicaciones. Las muestras fueron recolectadas por ingenieros de geología y minas(Universidad Técnica Particular de Loja, UTPL). Se realizaron un análisis de superficie específica, utilizando la prueba del azul de metileno (MBT), posterior a ello se eliminó materia orgánica, se separaron fracciones limo (> 4 µm) y arcilla (= 4µm) y se eliminaron carbonatos (purificación de las muestras) en los laboratorios de Análisis Instrumental (Facultad de Ciencias, ESPOCH) y los departamentos de Geología y Minas e Ingeniería Civil (UTPL) Las muestras purificadas fueron sometidas a análisis de difracción de rayos X para definir cualitativa y cuantitativamente sus fases (software EVA y TOPAS). Se realizaron análisis de fluorescencia de rayos X para determinar su composición química y elemental. Utilizando los valores de superficie específica y fracción de arcilla se estimó el porcentaje de montmorillonita, el mismo que sigue una tendencia similar al establecido por difracción de rayos X, verificando así los resultados.Se estableció que 13 de las 17 muestras analizadas son montmorillonitas, para cada muestra se señaló el punto del polígono correspondiente y se comparó el porcentaje de arcilla y montmorillonita, facilitando posteriores análisis de eficiencia de explotación. En conclusión, la muestra 1 del punto 2 (P1M2) contiene mayor cantidad de arcilla y la muestra 2 del punto 9 (P9M2) menor. La muestra 2 del punto 4 (P2M4) mayor porcentaje de montmorillonita y la muestra 1 del punto 2 (P2M1) menor. En el caso de caracterización de materiales se recomienda realizar análisis complementarios con el fin de verificar los resultados.
URI : http://dspace.espoch.edu.ec/handle/123456789/3110
Aparece en las colecciones: Ingeniero/a Químico/a

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
96T00229.pdf3,77 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons