Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/3220
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorSánchez, Gonzalo-
dc.contributor.authorValdiviezo Sánchez, Pablo Serafín-
dc.date.accessioned2014-02-28T00:38:48Z-
dc.date.available2014-02-28T00:38:48Z-
dc.date.issued2014-02-28T00:38:48Z-
dc.identifier.citationValdiviezo Sánchez, Pablo Serafín. (2014). Diseño de un sistema de tratamiento para la potabilización del agua en la parroquia San Andrés del Cantón Guano, provincia de Chimborazo. Escuela Superior Politécnica de Chimborazo. Riobamba.es_ES
dc.identifier.urihttp://dspace.espoch.edu.ec/handle/123456789/3220-
dc.descriptionLa presente investigación se realizó con el propósito de diseñar un sistema de tratamiento para la potabilización del agua de la parroquia de San Andrés del Cantón Guano, provincia de Chimborazo. Conforme a las caracterizaciones físicas- químicas y microbiológicas del agua se pudo determinar la necesidad de diseñar un sistema de tratamiento convencional para potabilización del fluido capaz de eliminar dureza fosfatos y coliformes totales.Con el uso de un caudalimetro Parshall se efectuó la medición del caudal total que ingresaría al sistema siendo este de 0,0159 m3/s , posteriormente le fluido paso a 2 sedimentadores clásicos donde se eliminarían los sólidos en suspensión arrastrados por la aducción de este, desde la captación hasta el tanque de almacenamiento, posteriormente pasaría a los filtros lentos con zeolitas en donde se producirá un intercambio iónico entre los iones libres del medio poroso y los cationes Ca+ y Mg+ disminuyendo la dureza, de 392 mg/L a 48 mg/L y de igual forma el contenido de Fosfatos de 0,714 mg/L a 0,234 mg/L, finalizado esta etapa el fluido será transportado al tanque de desinfección de 10 m3 el volumen del hipoclorador será de 0,04 m3 donde se diluirá 1,5 g/L de Hipoclorito de Calcio, para eliminar agentes patógenos y coliformes totales encontrados en esta agua, finalizado este proceso se enviara a un tanque cuyo volumen será de 500m3 donde el agua posara hasta obtener una homogenización adecuada del desinfectante y finalmente se procederá a su distribución. Este sistema se lo realizo con una proyección de 25 años, tiempo en el cual funcionara con una alta eficiencia. Con estos procesos realizados se logró controlar los parámetros que se encontraban fuera de los límites permisibles de la Norma INEN 1108 de Agua Potable. Los resultados de la investigación que se realizó, nos permitió establecer un Diseño que nos permitirá contar con un agua de calidad.es_ES
dc.description.abstractThe present investigation was carried out with the purpose of designing a treatment system for the purification of water in the parish of San Andres, Canton Guano, province of Chimborazo. According to the physical-chemical and microbiological characterizations of the water, it was possible to determine the need to design a conventional treatment system for the potabilization of the fluid, capable of eliminating phosphate hardness and total coliforms. With the use of a Parshall flowmeter, the total flow that would enter the system was measured at 0.0159 m3/s, then the fluid would pass through 2 classic settling tanks where the suspended solids dragged by the adduction of this from the intake to the storage tank would be eliminated, then it would pass to the slow filters with zeolites where an ionic exchange between the free ions of the porous medium and the Ca+ and Mg+ cations would take place, decreasing the hardness, From 392 mg/L to 48 mg/L and likewise the Phosphate content from 0.714 mg/L to 0.234 mg/L. At the end of this stage the fluid will be transported to the 10 m3 disinfection tank, the volume of the hypochlorinator will be 0.04 m3 where 1.5 g/L of Calcium Hypochlorite will be diluted to eliminate pathogens and coliforms, Once this process is finished, the water will be sent to a tank with a volume of 500 m3 where the water will settle until an adequate homogenization of the disinfectant is obtained and finally it will be distributed. This system was designed with a projection of 25 years, during which time it will operate with high efficiency. With these processes, it was possible to control the parameters that were outside the permissible limits of the INEN 1108 Drinking Water Standard. The results of the research that was carried out allowed us to establish a design that will allow us to have quality water.es_ES
dc.language.isospaes_ES
dc.publisherEscuela Superior Politécnica de Chimborazoes_ES
dc.relation.ispartofseriesUDCTFC;96T00224-
dc.rightsinfo:eu-repo/semantics/openAccesses_ES
dc.subjectGUANO [CANTÓN]es_ES
dc.subjectSAN ANDRES [PARROQUIA]es_ES
dc.subjectPOTABILIZACIÓN DEL AGUAes_ES
dc.subjectSISTEMAS DE TRATAMIENTO DE AGUAes_ES
dc.subjectDISEÑO DE SISTEMAS DE TRATAMIENTO DE AGUAes_ES
dc.titleDiseño de un sistema de tratamiento para la potabilización del agua en la parroquia San Andres del Cantón Guano, provincia de Chimborazoes_ES
dc.typebachelorThesises_ES
dc.contributor.miembrotribunalÁvalos, César-
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
Aparece en las colecciones: Ingeniero/a Químico/a

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
96T00224.pdf2,71 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons