Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/5807
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorMontalvo Jaramillo, Pablo-
dc.contributor.authorCórdova Cox, Erick Alexis-
dc.contributor.authorRivadeneira Aguirre, Elvis Danilo-
dc.date.accessioned2017-01-18T19:10:02Z-
dc.date.available2017-01-18T19:10:02Z-
dc.date.issued2016-11-17-
dc.identifier.citationCórdova Cox, Erick Alexis; Rivadeneira Aguirre, Elvis Danilo. (2016). Implementación de un banco de prueba para el control automático de posición, temperatura y velocidad, en el laboratorio de control y manipulación automática de la Facultad de Mecánica. Escuela Superior Politécnica de Chimborazo. Riobamba.es_ES
dc.identifier.urihttp://dspace.espoch.edu.ec/handle/123456789/5807-
dc.descriptionEl presente trabajo de titulación consiste en implementar un módulo de entrenamiento para realizar el control y monitoreo de posición, temperatura y velocidad con aplicaciones de control PID de las mismas variables mediante una planta real representada por el módulo de entrenamiento, permitiendo fortalecer el estudio práctico dentro del laboratorio de control y manipulación automática. Tanto el módulo de entrenamiento como los programas de control y monitoreo se construyen aplicando conocimientos adquiridos durante la investigación del estudio bibliográfico y teoría de varias materias estudiadas a lo largo nuestra formación profesional dentro de la carrera, para el diseño de la placa electrónica se aplican las normas para el diseño de PCBs, el cual nos muestra cómo se acoplan los elementos y dispositivos que integran el modulo, así como el funcionamiento general del mismo. La placa está limitada para que los circuitos que están agrupados en bloques o secciones funcionen con una fuente de alimentación de 12Vdc. El módulo se conecta a una DAQ Multifunción NI USB-6009 mediante sus respectivas entradas y salidas tanto analógicas como digitales y mediante este a un programa de control y monitoreo desarrollado a través del software LabVIEW con la ayuda de un equipo computarizado y en el cual se puede visualizar de mejor forma el control de las diferentes variables. El control automático de posición, temperatura y velocidad se realiza al llevar a cabo las instrucciones y recomendaciones de la guía de prácticas, así como también de la guía de mantenimiento y seguridad del módulo, constituyendo una gran herramienta para ayudar a fortalecer los conocimientos en el área de control y manipulación automática, adquiridos durante el proceso pedagógico de enseñanza y aprendizaje entre maestros y estudiantes.es_ES
dc.description.abstractThe present titling work consists of implementing a training module to perform the control and monitoring of position, temperature and speed with PID control applications of the same variables through a real plant represented by the training module, allowing to strengthen the practical study within of the laboratory of control and automatic manipulation both the training module and the control and monitoring programs are built using knowledge acquired during the research of the bibliographic study and theory, of several subjects studied throughout our professional training in the career, for the design of the electronic plaque we apply the rules for the design of PCBs, which shows us how the elements and devices that make up the module are coupled, as well as the general operation of the same. The plaque is limited so that circuits that are grouped in the blocks or sections operate with a 12V dc power supply. The module is connected to a DAQ Multifunction NI USB-6009, through their respective analog and digital inputs and outputs and through this to a control and monitoring programs developed through the LabVIEW software with the aid of a computerized computer and in which the control of the different variables can be better visualized. The automatic control of position, temperature and speed is carried out by carrying out the instructions and recommendations of the practical guide, as well as the maintenance and safely guide of the module, providing a great tool to help strengthen the knowledge in the area of control and automatic manipulation, acquired during the pedagogical process of teaching and learning between teachers and students.es_ES
dc.language.isospaes_ES
dc.publisherEscuela Superior Politécnica de Chimborazoes_ES
dc.relation.ispartofseriesUDFM;25T00275-
dc.subjectMÓDULO DE ENTRENAMIENTO DE CONTROLes_ES
dc.subjectPROPORCIONAL INTEGRAL DERIVATIVO (PID)es_ES
dc.subjectCONTROL Y MANIPULACIÓN AUTOMÁTICAes_ES
dc.subjectPLACA ELECTRÓNICAes_ES
dc.subjectPLATAFORMA DE INGENIERÍA DE INSTRUMENTOS VIRTUALES DE LABORATORIO (LABVIEW)es_ES
dc.subjectINSTRUMENTO VIRTUAL (VI)es_ES
dc.subjectSEÑALES ANALOGICAS/DIGITALESes_ES
dc.subjectDISPOSITIVO DE ADQUISICIÓN DE DATOS (DAQ)es_ES
dc.subjectDISEÑO ASISTIDO POR COMPUTADORESes_ES
dc.titleImplementación de un banco de prueba para el control automático de posición, temperatura y velocidad, en el laboratorio de control y manipulación automática de la Facultad de Mecánica.es_ES
dc.typebachelorThesises_ES
dc.contributor.miembrotribunalHaro Medina, Marco Antonio-
Aparece en las colecciones: Ingeniero de Mantenimiento; Ingeniero/a en Mantenimiento Industrial

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
25T00275.pdf2,54 MBAdobe PDFVista previa
Visualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.