Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/5874
Título : Diseño de packaging inclusivo para productos de consumo masivo, para personas no videntes en la ciudad de Riobamba.
Autor : Sailema Remache, Jessica Anabel
Director(es): Paredes, Bertha
Tribunal (Tesis): Sandoval, Mónica
Palabras claves : TECNOLOGÍA Y CIENCIAS DE LA INGENIERÍA;DISEÑO GRÁFICO;ENVASE (PACKAGING);INCLUSIÓN SOCIAL;DISCAPACIDAD VISUAL;PRODUCTOS DE CONSUMO MASIVO
Fecha de publicación : nov-2016
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Sailema Remache, Jessica Anabel. (2016). Diseño de packaging inclusivo para productos de consumo masivo, para personas no videntes en la ciudad de Riobamba. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTFIYE;88T00202
Abstract : The aim of this research was to design a prototype for inclusive packaging for mass consumption white goods products, for visually impaired people in the city of Riobamba. Data collection was carried out with the 29 members of the Visually Impaired Association of Chimborazo, APRODVICH, and through interviews and observation, an understanding of the physical and economic characteristics of these people in terms of the packaging was obtained, which subsequently were the basis for the construction of the prototype. It was determined that for 31% of the participants price of the product was important, as they have limited economic means, but ot features were also important, such as the need for information in braille writing which was highlighted as being important for facilitating product recognition. For the construction of the prototype, a product was chosen based on statistics from the National Institute of Statistics and Census(INEC) and thus the decision was made to work with cooking oil, as it was identified as one of the 10 most consumed products. The packaging was made from PET l plastic, is the same plastic currently being which used in the market, with a one liter capacity, the form of the packaging did not undergo significant changes as this was the form the target audience was already familiar with and the product underwent major changes, rather than being a support this would make the packaging a hindrance for recognition. The label is aimed at two audiences, people with complete visual impairment and people with low vision. the text is in braille and there are other specific elements to facilitate comprehension. Packaging must be designed taking into consideration social inclusion for people with visual impairment and the different needs they have that must be met It is recommended that this initiative obtains the support of cooking oil manufacturers so that they can implement this system, as it is the responsibility of society as a to accept that there are people whole are part of a country's with disabilities and that people with disabilities economy
Resumen : La presente investigación tuvo como objetivo diseñar un prototipo de packaging inclusivo para productos de consumo masivo en línea blanca, para personas no videntes de la ciudad de Riobamba. En la recolección de datos se recurrió a los 29 miembros de la Asociación de no videntes de Chimborazo APRODVICH, a través de entrevistas y la observación, se pudo conocer las características físicas y económicas de estas personas frente al packaging, que posteriormente fueron las bases para la construcción del prototipo. Se determinó que al 31% de //los participantes le resulta importante conocer el precio de lo que va a adquirir, por su economía limitada, pero también manifestaron otras características, como la necesidad de que la información estuviera en escritura braille y que se resalte lo importante para facilitar el reconocimiento del producto. Para la construcción del prototipo, se eligió un producto bajo las estadísticas del Instituto Nacional de Estadística y Censos (INEC) y se decidió trabajar con el aceite comestible, al estar ubicado dentro del rango de los 10 productos más consumidos. El envase fue elaborado en material plástico PET 1, que es el mismo con el que se manejan los existentes en el mercado, con la capacidad de 1 litro, su forma no tiene mayores alteraciones ya que el público objetivo está familiarizado con la forma actual y si sufre alteraciones profundas, en vez de ser una ayuda dificultara su reconocimiento, la etiqueta está dirigida a dos públicos, las personas con discapacidad visual total y las personas con baja visión, está escrita en braille y también sus elementos guardan particularidades que facilitaran su comprensión. Es necesario diseñar packaging pensando en la inclusión social de las personas con discapacidad visual, ya que tienen necesidades distintas que necesitan ser satisfecha. Se recomienda que esta iniciativa cuente con el apoyo de empresas productoras de aceite que permita implementar este sistema, ya que el compromiso no solo de uno sino de toda una sociedad que acepte que existen personas con discapacidad y que ellos también son parte de la economía de un país.
URI : http://dspace.espoch.edu.ec/handle/123456789/5874
Aparece en las colecciones: Ingeniero en Diseño Gráfico

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
88T00202.pdf2,6 MBAdobe PDFVista previa
Visualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.