Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/8491
Título : Análisis de confiabilidad, mantenibilidad y disponibilidad (CMD) del sistema de reinyección de agua de formación de la Empresa Petroamazonas EP, Bloque 18 ZPF, Orellana-Ecuador.
Autor : Pazmiño Morales, Diego Ernesto
Director(es): Zabala, Washington
Tribunal (Tesis): Santillán, Marco
Freire Miranda, Jorge
Palabras claves : TECNOLOGÍA Y CIENCIAS DE LA INGENIERÍA;INGENIERÍA EN MANTENIMIENTO;REINYECCIÓN DE AGUA;CURVAS DE CONFIABILIDAD;CURVAS DE MANTENIBILIDAD;TIEMPO MEDIO ENTRE FALLAS;TIEMPO MEDIO PARA REPARAR;MANTENIBILIDAD;DISPONIBILIDAD;CONFIABILIDAD
Fecha de publicación : jul-2018
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Pazmiño Morales, Diego Ernesto. (2018). Análisis de confiabilidad, mantenibilidad y disponibilidad (CMD) del sistema de reinyección de agua de formación de la Empresa Petroamazonas EP, Bloque 18 ZPF, Orellana-Ecuador. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTIPEC;20T01046
Abstract : The system of water re-injection of block 18, Petroamazonas EP, presents unexpected failures that trigger continuous production losses. To be the Reliability, Maintainability and Availability the only technical and scientific measures, based on mathematical calculations, statistical and probabilistic. It analyzed and evaluated integrally and, specifically the main pumps of the water re-injection system, obtain the current situation of the same. With the estimation of the parameters of reliability, maintainability and availability, (β), eta (η), mean time between failure (MTBF) and mean time between repair (MTBR) of the main pumps of the re-injection system and system as such, it established recommendations and strategies that allow you to optimize the planning, execution, control of the management and operation of the maintenance. The universal model RMA proposed by Alberto Mora is the methodology that follows the investigation. In this way the curves were obtained that govern each pump according to their times of good operation and stop. Finally, it is possible to predict the tendency of the system pump, passed in the RMA, making analysis to optimize resources and avoid loss of production, it was concluded that RMA can be applied to the System pumps water re-injection, so it is recommended to continue with the analysis on a constant basis.
Resumen : El sistema de reinyección de agua del bloque 18, Petroamazonas EP, presentaba fallas continuas inesperadas que desencadenaban pérdidas de producción. Al ser la Confiabilidad, Mantenibilidad y Disponibilidad las únicas medidas técnicas y científicas, fundamentadas en cálculos, matemáticos y estadísticos y probabilísticos, se analizó y evaluó integralmente y específicamente las principales bombas del sistema de reinyección de agua obteniendo la situación actual del mismo. Con la estimación de los parámetros de confiabilidad y mantenibilidad se obtuvieron los valores de beta (β), eta (η), tiempo medio entre fallas (MTBF) y tiempo medio entre reparaciones (MTTR) de las bombas principales del sistema de reinyección y del sistema como tal, logrando establecer recomendaciones y estrategias que permiten optimizar la planeación, ejecución y control de la gestión y operación del mantenimiento. El modelo universal para el manejo del CMD propuesto por Alberto Mora es la técnica que sigue la investigación. De esta manera se obtuvieron las curvas que rigen a cada bomba en función de sus tiempos de buen funcionamiento y de parada. Finalmente se logra predecir la tendencia de las bombas del sistema permitiendo la comparación de etapa de vida y las recomendaciones para mejorar sus parámetros logrando optimizar recursos y evitar pérdidas de producción.
URI : http://dspace.espoch.edu.ec/handle/123456789/8491
Aparece en las colecciones: Maestrias: Modalidad Proyectos de Investigación y Desarrollo

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
20T01046.pdf6,29 MBAdobe PDFVista previa
Visualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.