Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/9296
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorCastillo Cárdenas, Edison Marcelo-
dc.contributor.authorSegovia Molina, Adrian Vinicio-
dc.contributor.authorVillarroel Jácome, Cristian Iván-
dc.date.accessioned2019-01-07T18:38:45Z-
dc.date.available2019-01-07T18:38:45Z-
dc.date.issued2018-01-18-
dc.identifier.citationSegovia Molina, Adrian Vinicio; Villarroel Jácome, Cristian Iván. (2018). Diseño, adaptación e implementacíon de un sistema de aspergeo para el Motocultor YTO-DF-15L del MAGAP. Escuela Superior Politécnica De Chimborazo. Riobamba.es_ES
dc.identifier.urihttp://dspace.espoch.edu.ec/handle/123456789/9296-
dc.descriptionEl presente trabajo de titulación tiene como finalidad diseñar un sistema de aspergeo para la posterior adaptación e implementación en un MOTOCULTOR YTO-DF-15L que pertenece al Ministerio de Agricultura y Ganadería MAG de la provincia de Chimborazo. Para elaborar este trabajo se modelan los elementos de soporte de la bomba de pistones y de los depósitos de 250L-500L en un software denominado Solid Works, continuamente se analiza las cargas y resistencias mecánicas de dichos elementos en tres estados sobredimensionamiento, en falla y en estado normal. Para aquello se realiza la simulación por el método de elementos finitos con el software denominado ANSYS WORKBENCH. Una vez elaborado los planos del prototipo se realiza el proceso de manufactura del soporte de la bomba y del remolque en un taller mecánico dotado de equipos y herramientas necesarias como: torno de precisión, suelda eléctrica, amoladora, taladro, flexómetro. Para un correcto funcionamiento del sistema de aspergeo se elabora manuales de mantenimiento, operación y armado que son de gran ayuda para el agricultor; Con esta implementación se obtiene beneficios como: tener un mejor control de las plagas y enfermedades que afectan al crecimiento de la plántula, ahorrar tiempo y mano de obra, mayor aprovechamiento de los productos químicos, tener menos vías de contacto entre el agricultor y los plaguicidas. Con el fin de evitar un mal funcionamiento en la armonía del movimiento del motocultor se recomiendan no realizar perforaciones en el chasis del motocultor y no cambiar el punto de gravedad del motocultor al momento de adaptar la bomba de pistones.es_ES
dc.description.abstractThis titling project deals with designing a spraying system for its subsequent adaptation and implementation in a walking tractor YTO – DF – 15L which belongs to the Ministry of Agriculture and Livestock MAG of Chimborazo province. To do this work the support elements of the piston pump and the deposits of 250L – 500L are molded in a software called SolidWorks, mechanical loads and strength of such elements are constantly analyzed in three states overdimensioning, in fault and normal state. For this purpose, the simulation is carried out by the finite element method with the software called ANSYS Workbench. Once the prototype drawings have been prepared, the manufacturing process of the pump support and trailer is carried out in a mechanical workshop geared with the necessary equipment and tools such as a precision winch, an electric welding machine, a grinding machine, a drill, a flexometer. Maintenance, operation and assembly manuals were developed for a correct operation of the spraying system which is an invaluable aid for the farmer. An accurate pest and diseases control that affects growth seedling, saving time and workforce, better utilization of the chemical products, have fewer ways of contact among the farmer and the pesticides are the benefits obtained with this implementation. In order to avoid a poor operation in the motion harmony of the walking tractor, it is recommended do not drill holes in its chassis and do not change the center of gravity adapting the piston pump.es_ES
dc.language.isospaes_ES
dc.publisherEscuela Superior Politécnica De Chimborazoes_ES
dc.relation.ispartofseriesUDCTFM;65T00269-
dc.rightsInfo:eu-repo/semantics/openAccesses_ES
dc.subjectTECNOLOGÍA Y CIENCIAS DE LA INGENIERÍAes_ES
dc.subjectSISTEMA DE ASPERGEOes_ES
dc.subjectMOTOCULTORes_ES
dc.subjectSOLIDWORKS (SOFTWARE)es_ES
dc.subjectANSYS WORKBENCH (SOFTWARE)es_ES
dc.subjectBOMBA DE PISTONESes_ES
dc.subjectPLAGUICIDASes_ES
dc.subjectMANUFACTURAes_ES
dc.titleDiseño, adaptación e implementacíon de un sistema de aspergeo para el Motocultor YTO-DF-15L del MAGAP.es_ES
dc.typebachelorThesises_ES
dc.contributor.miembrotribunalPérez Fiallos, José Francisco-
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
Aparece en las colecciones: Ingeniero Automotriz

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
65T00269.pdf6,4 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons