Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/9661
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorMayorga Pérez, Diego Fernando-
dc.contributor.authorJurado Salguero, David Efraín-
dc.contributor.authorBarahona Fray, Eduardo Javier-
dc.date.accessioned2019-02-25T14:08:23Z-
dc.date.available2019-02-25T14:08:23Z-
dc.date.issued2018-03-16-
dc.identifier.citationJurado Salguero, David Efraín Barahona Fray, Eduardo Javier.(2018). Diseño y construcción de una trituradora de arena de moldeo para el área de fundición de la empresa MINABRADEC. Escuela Superior Politécnica de Chimborazo. Riobamba.es_ES
dc.identifier.urihttp://dspace.espoch.edu.ec/handle/123456789/9661-
dc.descriptionEl propósito del presente trabajo consistió en el diseño y construcción de una trituradora de arena de moldeo para el área de fundición de la empresa MINABRADEC. Este trabajo surge debido a la ineficiencia del proceso de trituración en la empresa, mismo que se realizaba de forma manual, por lo que se busca solucionar este problema. Para ello fue necesario indagar bibliografía y propuestas tecnológicas relacionadas con los diferentes métodos de trituración existentes, siguiendo con el diseño conceptual del producto, donde se establecieron las necesidades del cliente y especificaciones de la máquina, dando de esta manera diferentes alternativas de solución para proceder a seleccionar la más adecuada, según los resultados que se obtuvieron en el estudio de la casa de la calidad y los criterios ponderados se seleccionó una trituradora de martillos. La máquina seleccionada se modeló en el software SolidWorks para confirmar sus dimensiones y continuar con el diseño mecánico de cada uno de sus elementos, determinando así diámetros, dimensiones y factores de seguridad de los mismos, posteriormente se realizó la simulación de impacto del proceso de trituración en el software ANSYS comprobando así los cálculos realizados. Se obtuvo una trituradora de martillos cuyo sistema de trituración consta de un eje principal, 4 ejes secundarios cada uno con 10 martillos y una capacidad de trabajo correspondiente a 25,19 kg/min, entregando un producto final con una granulometría de 230 a 300 micras adecuado para el proceso de fundición de la empresa. Se recomienda que la arena que ingresa a la máquina no tenga restos de material fundido, para no desgastar prematuramente el sistema y no taponar o bloquear los elementos de la máquina.es_ES
dc.description.abstractThe objective of this investigation was the design and construction of a sand molding crusher for the foundry area of the MINABRADEC company. This investigation arises due to the inefficiency of the crushing process in the company, which was done manually, so it seeks to solve this problem. For that it was necessary to investigate bibliography and technological proposals related to the different existing crushing methods, following with the conceptual design of the product, were the needs of the client and specifications of the machine were established, giving in this way different alternatives of solution to proceed to select the most appropriate, according to the results that were obtained in the study of the house, of quality and weighted criteria was selected a hammer crusher. The selected machine was modeled in the software SolidWorks to confirm its dimensions and continue with the mechanical design of each one of its elements, thus determining diameters, dimensions and safety factors of the same, then the impact simulation of the crushing process was performed in the ANSYS software checking the calculation made. A hammer crusher was obtained which crushing system consists of a main axis, 4 secondary axis each with 10 hammers and a working capacity corresponding to 25,19kg/min, delivering a final product with a granulometry of 230 to 300 microns suitable for the smelting process of the company. It is recommended that the sand entering the machine does not have traces of molten material, so as not to prematurely wear out the system and not to clog or block the elements of the machine.es_ES
dc.language.isospaes_ES
dc.publisherEscuela Superior Politécnica de Chimborazoes_ES
dc.relation.ispartofseriesUDCTFM;15T00688-
dc.relation.urihttps://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.rightsInfo:eu-repo/semantics/openAccesses_ES
dc.subjectTECNOLOGÍA Y CIENCIAS DE LA INGENIERÍAes_ES
dc.subjectSISTEMA DE TRITURACIÓNes_ES
dc.subjectMOLINO DE MARTILLOSes_ES
dc.subjectANÁLISIS DE IMPACTOes_ES
dc.subjectANSYS (SOFTWARE)es_ES
dc.titleDiseño y construcción de una trituradora de arena de moldeo para el área de fundición de la empresa MINABRADEC.es_ES
dc.typebachelorThesises_ES
dc.contributor.miembrotribunalOrna Chávez, Javier Enrique-
Aparece en las colecciones: Ingeniero/a Mecánico/a

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
15T00688.pdf3,6 MBAdobe PDFVista previa
Visualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.