Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/9680
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorOrna Chávez, Javier Enrique-
dc.contributor.authorAnaluisa Topa, Diego Armando-
dc.contributor.authorJácome Iza, Julio César-
dc.date.accessioned2019-02-25T18:38:01Z-
dc.date.available2019-02-25T18:38:01Z-
dc.date.issued2018-04-25-
dc.identifier.citationAnaluisa Topa, Diego Armando; Jácome Iza, Julio César. (2018). Diseño y construcción de un elevador hidráulico con volteo para la cosecha de palma africana para una capacidad de 5 ton. Escuela Superior Politécnica de Chimborazo. Riobamba.es_ES
dc.identifier.urihttp://dspace.espoch.edu.ec/handle/123456789/9680-
dc.descriptionEl presente proyecto tiene como objetivo diseñar y construir un elevador hidráulico con volteo para la cosecha de palma africana con una capacidad de 5 toneladas para aumentar la eficiencia y la producción de las empresas palmicultoras. Para su realización se recopiló la información necesaria acerca de la palma africana, sus características, propiedades, metodologías de cosecha y transporte mediante un estudio bibliográfico para proceder a realizar una matriz QFD (Quality Function Deployment) donde se procede a definir las especificaciones de diseño y elegimos la mejor opción con un material ASTM A-36. A continuación, se realizó el diseño mecánico donde se dimensionó la tolva para una capacidad de 5 toneladas, se comprobó su resistencia y factor de seguridad en el software ANSYS. Se realizó un análisis estático de la estructura en posición baja, media y alta donde la parte más crítica se encuentra en la posición alta en la cual se analizó en el software ANSYS la resistencia y factor de seguridad. Posteriormente se realizó el diseño de los pasadores, barras y placa. Para completar el diseño mecánico se realizó el análisis dinámico en el software ADAMS. Finalmente se seleccionó las mangueras hidráulicas de acuerdo a la presión que tiene la bomba hidráulica del tractor New Holland, se realizó la selección de los cilindros hidráulicos para elevación y volteo, se diseñó los diagramas del circuito hidráulico. En conclusión, el elevador hidráulico soporta una capacidad de carga de 6,5 toneladas y tiene un sistema de transporte adecuado lo cual garantiza una producción eficiente en la cosecha de palma africana. Se recomienda revisar el manual de mantenimiento del elevador hidráulico para alargar la vida útil del equipo.es_ES
dc.description.abstractThe purpose of this project is to design and build a hydraulic lift for the harvest of African palm with a capacity of 5 tons to increase the efficiency and production of palm oil companies. For its realization, it was compiled the necessary information about the African palm, its characteristics, properties, harvest methodologies and transport by means of a bibliographic study to proceed to make a QFD matrix (Quality Function Deployment) where the design specifications are defined and is chosen the best option with an ASTM A-36 material. Then, the mechanical design was performed where the hopper was dimensioned for a capacity of 5 tons, its resistance and safety factor were checked in the ANSYS software. A static analysis of the structure in low, medium and high position was performed where the most critical part is in the high position in which the resistance and safety factor was analyzed in the ANSYS software. Subsequently, it was made the design of the pins, bars and plate. In order to complete the mechanical design, it was carried out the dynamic analysis in the ADAMS software. Finally, the hydraulic hoses were selected according to the pressure of the hydraulic pump of the New Holland tractor, it was made the selection of the hydraulic cylinders for lifting and turning, they were designed the diagrams of the hydraulic circuit. In conclusion, the hydraulic lift supports a load capacity of 6.5 tons and has an adequate transportation system which guarantees an efficient production in the African palm harvest. It is recommended to review the maintenance manual of the hydraulic lift to extend the useful life of the equipment.es_ES
dc.language.isospaes_ES
dc.publisherEscuela Superior Politécnica de Chimborazoes_ES
dc.relation.ispartofseriesUDCTFM;15T00694-
dc.rightsInfo:eu-repo/semantics/openAccesses_ES
dc.subjectTECNOLOGÍA Y CIENCIAS DE LA INGENIERÍAes_ES
dc.subjectCAPACIDAD DE CARGAes_ES
dc.subjectSISTEMA DE DIRECCIÓNes_ES
dc.subjectSISTEMA HIDRÁULICOes_ES
dc.subjectSISTEMA TIPO TIJERAes_ES
dc.subjectÁNGULO DE VOLTEOes_ES
dc.titleDiseño y construcción de un elevador hidráulico con volteo para la cosecha de palma africana para una capacidad de 5 ton.es_ES
dc.typebachelorThesises_ES
dc.contributor.miembrotribunalLópez Ortiz, Santiago Alejandro-
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
Aparece en las colecciones: Ingeniero/a Mecánico/a

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
15T00694.pdf7,41 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons