Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/9698
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorMayorga Pérez, Diego Fernando-
dc.contributor.authorGalarza Asanza, Pedro Mauricio-
dc.contributor.authorUzhca Cayo, Alex Fabián-
dc.date.accessioned2019-02-28T20:13:19Z-
dc.date.available2019-02-28T20:13:19Z-
dc.date.issued2018-07-05-
dc.identifier.citationGalarza Asanza, Pedro Mauricio; Uzhca Cayo, Alex Fabián. (2018). Análisis de un prototipo de tanque de combustible para motocicletas fabricado con material compuesto (fibra de vidrio) mediante ensayos físicos según la norma J SAE JASO T906-2002. Escuela Superior Politécnica de Chimborazo. Riobamba.es_ES
dc.identifier.urihttp://dspace.espoch.edu.ec/handle/123456789/9698-
dc.descriptionEl objetivo del presente Proyecto de Investigación es analizar el diseño de un prototipo del tanque de combustible para motocicletas, se han elegido los tipos de pruebas más adecuados dados por la norma J SAE JASO T906-2002, con el fin de poder justificar la producción en serie del prototipo en nuestro país, para lo cual hemos elegido 7 pruebas físicas y 2 pruebas de la resistencia del material para la elaboración del presente proyecto de investigación, comenzando con la fabricación de tres prototipos de tanque de combustible hechos de material compuesto (fibra de vidrio) con la facilidad del diseño antes realizado por ser una continuación del estudio. Las probetas se prepararon y el acondicionamiento como se describe allí, después de que se obtuvieron los resultados de las pruebas que sirven para justificar la fabricación del tanque de combustible. Las pruebas se llevaron a cabo aplicando los procedimientos descritos en la norma, con la creación de una cama de montaje especificado en la norma antes mencionada y utilizando el equipo existente en los laboratorios de la Facultad de Mecánica de la Escuela Superior Politécnica de Chimborazo y el Centro de Fomento Productivo Metalmecánico Carrocero (CFPMC). A partir de los resultados obtenidos, concluimos que debido a las características del material y por el proceso de fabricación del tanque de combustible no es adecuado para ser fabricado en serie en nuestro país, se recomienda un nuevo tipo de material para poder construir tanques de combustible generar una producción nacional.es_ES
dc.description.abstractThe objective of the present Special Project is to analyze the design and prototype of the fuel tank for motorcycles, the most suitable types of tests given by the J SAE JASO T906-2002 standards have been chosen, in order to be able to justify the mass production of the prototype in our country, for which we have chosen 7 physical tests and 2 tests on the strength of the material for the elaboration of the present special project, starting with the manufacture of three fuel tank prototypes made of composite material (fiberglass) with the ease of the design already made for being a continuation of the study. Specimens were prepared and the conditioning as described therein, after the tests results were obtained which serve to justify the manufacturing of the fuel tank. The tests were carried out by applying the procedures described in the norm, with the creation of an assembly bed specified in the above mentioned norm and using existing equipment in the laboratories of the Faculty of Mechanics of the Escuela Superior Politécnica de Chimborazo and the Center for the Development of Productive Metal mechanics Bodybuilding (CFPMC). From the results obtained, we conclude that due to the characteristics of the material and by the manufacturing process of the fuel tank is not suitable to be mass manufactured in our country, a new type of material is recommended to be able to build fuel tanks to generate a national production.es_ES
dc.language.isospaes_ES
dc.publisherEscuela Superior Politécnica de Chimborazoes_ES
dc.relation.ispartofseriesUDCTFM;65T00275-
dc.rightsInfo:eu-repo/semantics/openAccesses_ES
dc.subjectTECNOLOGÍA Y CIENCIAS DE LA INGENIERÍAes_ES
dc.subjectINGENIERÍA AUTOMOTRIZes_ES
dc.subjectMATERIALES COMPUESTOSes_ES
dc.subjectPRUEBAS NO DESTRUCTIVASes_ES
dc.subjectPRESIÓN DE AIREes_ES
dc.subjectPROTOTIPOes_ES
dc.titleAnálisis de un prototipo de tanque de combustible para motocicletas fabricado con material compuesto (fibra de vidrio) mediante ensayos físicos según la norma J SAE JASO T906-2002.es_ES
dc.typebachelorThesises_ES
dc.contributor.miembrotribunalQuinga Morales, Milton Israel-
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
Aparece en las colecciones: Ingeniero Automotriz

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
65T00275.pdf2,68 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons