Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/9743
Título : Construcción, pruebas técnicas y evaluación de un prototipo para el análisis de cargas posturales en la mano de trabajadores de oficina.
Autor : Vélez Núñez, Lourdes Andrea
Paz Y Miño Sola, Carlos Alberto
Director(es): Santillán Mariño, Carlos José
Tribunal (Tesis): Gavilanes Carrión, Javier José
Palabras claves : TECNOLOGÍA Y CIENCIAS DE LA INGENIERÍA;INGENIERÍA INDUSTRIAL;ERGONOMÍA DE LA MANO;ERGONOMÍA Y PRODUCTIVIDAD;RAPID UPPER LIMB ASSESSMENT (RULA);OVAKO WORKING ANALYSIS SYSTEM (OWAS);RIOBAMBA (CANTÓN)
Fecha de publicación : 23-may-2018
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Vélez Núñez, Lourdes Andrea Paz Y Miño Sola, Carlos Alberto. (2018). Construcción, pruebas técnicas y evaluación de un prototipo para el análisis de cargas posturales en la mano de trabajadores de oficina. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTFM;85T00510
Abstract : The construction, technical tests and evaluation of a Prototype for the analysis of the hand postural tremor in office workers through the use of MATLAB software in order to prevent occupational diseases. The current valid methods for ergonomic analysis such as: RULA (Rapid Upper Limb Assessment), REBA (Rapid Entire Body Assessment) and OWAS (Ovako Working Analysis System) were identified by using bibliographic research, in addition the percentile interpolation method and Rohmert's law were used to deepen and detail the analysis in a better way. The Prototype design was made taking into account the comfort and safety for the user, the bending sensors that holds it as well as the weight of the Prototype. The developed software which handles the prototype consists of an interface that plots the hand postural tremor in real time, also it allows to obtain the maximum exposure time and the percentile as well as determine the existence of risky angles for the hand of the person being tested. The calculated sample size was 640 data per bending sensor, this was taken from employees of the Polytechnic Welfare office at Escuela Superior Politécnica of Chimborazo. It was obtained that the data behave in a quadratic way in all postural tremors: 84.33% of the data corresponding to the angles in the extension movement, as well as the 78.70% of the data corresponding to the angles in the abduction movement in the office workers studied are high risk. In addition, it was obtained that from 30% to 40% of the total work time are risky angles. The prototype measures and processes the hand postural tremors of office workers in a satisfactory way, and also it is comfortable and does not impede the daily work of the user. It is recommended to deepen the results with occupational physicians as well as with a certified software.
Resumen : La construcción, pruebas técnicas y evaluación de un Prototipo para el análisis de cargas posturales en la mano de trabajadores de oficina, mediante el uso de MATLAB, con el fin de prevenir enfermedades profesionales. Utilizando la investigación bibliográfica identificaron los métodos validados actualmente para el análisis ergonómico como lo son: RULA, REBA y OWAS, además del método de interpolación de percentiles y la ley de Rohmert, con las cuales se profundizó y detalló de mejor manera el análisis. El diseño del Prototipo fue realizado considerando la comodidad y seguridad para el usuario, los sensores de flexión que sujeta y el peso del Prototipo. El Software desarrollado que maneja el Prototipo consta de una interfaz que grafica las cargas posturales de la mano en tiempo real, así mismo permite obtener el tiempo máximo de exposición, el percentil y determinar la existencia de ángulos riesgosos para la mano de la persona en estudio. El tamaño de muestra calculado resultó de 640 datos por sensor de flexión, a su vez esta fue tomada de trabajadores de oficina de Bienestar Politécnico de la Escuela Superior Politécnica de Chimborazo. Se obtuvo que los datos se comportan de manera cuadrática en todas las cargas posturales; el 84.33 % de los datos correspondientes a los ángulos en el movimiento de extensión en los trabajadores de oficina estudiados son de riesgo alto, así como el 78.70% correspondiente a los ángulos en el movimeinto de abducción. Además, se obtuvo que del 30% al 40% del tiempo total de trabajo se sostienen ángulos riesgosos. El Prototipo mide y procesa satisfactoriamente las cargas posturales de la mano de trabajadores de oficina , además es cómodo y no impide las laborales rutinarias del usuario, se recomienda profundizar la valoración de los resultados con médicos ocupacionales y con un software certificado.
URI : http://dspace.espoch.edu.ec/handle/123456789/9743
Aparece en las colecciones: Ingeniero Industrial

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
85T00510.pdf4,3 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons