Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/9827
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorEscobar Guachambala, Miguel Ángel-
dc.contributor.authorTapuy Chimbo, Stalin Humberto-
dc.date.accessioned2019-03-13T14:57:06Z-
dc.date.available2019-03-13T14:57:06Z-
dc.date.issued2018-06-21-
dc.identifier.citationTapuy Chimbo, Stalin Humberto. (2018). Análisis de desempeño del gato mecánico eleva automóvil del modelo M4 en la empresa Ciauto conforme a lo especificado en RTE-INEN 195/ISO 8720. Escuela Superior Politécnica de Chimborazo. Riobamba.es_ES
dc.identifier.urihttp://dspace.espoch.edu.ec/handle/123456789/9827-
dc.descriptionEl objetivo del presente trabajo de titulación es realizar el análisis de desempeño del gato mecánico eleva automóvil del modelo M4 de la marca GREAT WALL, en el cual está compuesto por sus elementos de soporte base, remaches, brazos superiores e inferiores soporte superior, tornillo de potencia, horquillas y conjunto rodamiento. El procedimiento que se determinaron son: el levantamiento de planos y aplicación de ingeniería inversa, del cual nos sirve para modelar la geometría del mecanismo en un software CAD para obtener el modelo digital para luego analizar a través de la dinámica de transient structural y static structural, utilizando el software ANSYS MECHANICAL. Los valores de entrada para el modelo mecánico fueron obtenidos directamente en la empresa CIAUTO S.A., los cuales fueron: peso vehicular bruto, peso en las ruedas delanteras y posteriores, distancia en los puntos de anclaje para colocación del gato mecánico, estos parámetros fueron utilizados para simular el modelo mecánico dinámico y estático, se logró apreciar el desempeño del gato mecánico a través de los resultados conseguidos mediante el modelo mecánico y mediante cálculos matemáticos frente a los análisis de desempeño experimental establecidas en la norma ISO 8720, de acuerdo con la regulación técnica ecuatoriana INEN RTE 195. Para decretar la fiabilidad del sistema mecánico. Mediante la comparación de resultados obtenidos en el análisis por los procesos se determinó que el sistema mecánico cumple con lo establecido en la norma por tanto es fiable el modelo del gato mecánico en el vehículo M4. Se analizó el desempeño del gato mecánico para elementos mecánicos de elevación a través de la comparación de resultados obtenidos experimentales con análisis de método de elementos finitos. Lo cual aprueba la fiabilidad del elemento mecánico. El actual trabajo de investigación puede ser tomado como punto de inicio para futuros colaboraciones sobre el desarrollo de construcción de gato mecánicoes_ES
dc.description.abstractThe objective of the present work degree is to carry out the performance analysis of the mechanical Jack lifts car of the model M4 from GRAT WALL Brand, which is composed of its base support elements, rivets, upper and lower arms, upper support, power screw, forks and bearing set. The procedure that was determined are the lifting of the planes and application of reverse engineering, which helps us to model the geometry of the mechanism in a CAD software to obtain the digital model and then analyze through the dynamics of transient structural and static structural, using the ANSYS MECHANICAL software. The input values for the mechanical model were obtained directly in the amendment of the company CIAUTO S.A, which were; gross vehicle weight in the front and rear wheels and distance in the anchor points for the placement of the mechanical Jack, these parameters were used to simulate the dynamic and static mechanical model. It was possible to appreciate the performance of the mechanical Jack through the results obtained through the mechanical model and through mathematical calculation face the experimental performance analysis established in ISO 8720 in accordance with the Ecuadorian technical regulation INEN RTE 195 to decree the reliability of the mechanical system. By comparing the results obtained in the analysis by the processes, it was determined that the mechanical system fulfill with the established in the standard, therefore the model of the mechanical Jack in the vehicle M4 is reliable. The performance the mechanical Jack for mechanical elevation elements was analyzed through the comparison of results obtained experimentally with analysis of the finite element method that approves the reliability of the mechanical element. The current research work can be taken as a starting point for future collaborations on the development of mechanical jack construction.es_ES
dc.language.isospaes_ES
dc.publisherEscuela Superior Politécnica de Chimborazoes_ES
dc.relation.ispartofseriesUDCTFM;65T00277-
dc.rightsinfo:eu-repo/semantics/openAccesses_ES
dc.subjectTECNOLOGÍA Y CIENCIAS DE LA INGENIERÍAes_ES
dc.subjectANSYS – STATIC (SOFTWARE)es_ES
dc.subjectDISEÑO ASISTIDO POR COMPUTADORA (CAD)es_ES
dc.subjectGATO MECÁNICO (ELEVADOR)es_ES
dc.subjectINGENIERÍA INVERSAes_ES
dc.titleAnálisis de desempeño del gato mecánico eleva automóvil del modelo M4 en la empresa Ciauto conforme a lo especificado en RTE-INEN 195/ISO 8720.es_ES
dc.typebachelorThesises_ES
dc.contributor.miembrotribunalCepeda Godoy, Carlos Ramiro-
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
Aparece en las colecciones: Ingeniero Automotriz

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
65T00277.pdf2,15 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons