Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/9867
Título : Integración de redes industriales mediante un software de monitoreo y adquisición de datos en el laboratorio de control y manipulación automática de la carrera de Ingeniería de Mantenimiento.
Autor : Espinoza Castro, Mercedes Lisette
Baño Soto, Jhonny Paul
Director(es): Montalvo Jaramillo, Pablo Ernesto
Tribunal (Tesis): Moreano Sanchez, Gabriel Vinicio
Palabras claves : TECNOLOGÍA Y CIENCIAS DE LA INGENIERÍA;INGENIERÍA DE MANTENIMIENTO;PROTOCOLOS DE COMUNICACIÓN;CONTROL INDUSTRIAL;LABVIEW (SOFTWARE)
Fecha de publicación : 26-oct-2018
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Espinoza Castro, Mercedes Lisette; Baño Soto, Jhonny Paul. (2018). Integración de redes industriales mediante un software de monitoreo y adquisición de datos en el laboratorio de control y manipulación automática de la carrera de Ingeniería de Mantenimiento. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTFM;25T00337
Abstract : It was carried out the integration of industrial networks, the development of this work was researched basedon networks settings such as: Profibus, Ethernet / Profinet, AS-i and the communication protocol Modbus RTU RS 485, the topology and configuration for the transmission of data between the PC and electronic devices that constitute the integration of industrial networks. Created communication between PC and each one of the electronic devices that constitute the module of industrial networks, it proceeds to program one device at a time. The integration of networks is designed for the transfer of control and monitoring data between the master-slave stations, the integration was made with already existing processes in the Control and Automatic Manipulation laboratory at the of Maintenance Engineering School, the station that works and reading as a master would be a PC (Sotfware LabVIEW) which is responsible for sending and receiving writing and reading signals from slave stations. The operation tests of the data transfer in the slave master communication network were performed: LabVIEW between PLC MASTER S7 1200 (SIEMENS) and PLC SLAVE S7 1200, MODBUS RTU - PLC S7 1200 (SIEMENS) and LabVIEW through serial RS 485 And OPC, it should be hihglighted in all cases the software LabVIEW which acts as a teacher in the network. Previous the manipulation of the module it is recommended the correct familiarization in teh use of all of the elements that have applied the development of this research.
Resumen : Se realizó la integración de redes industriales, para el desarrollo de este trabajo se investigó acerca de las configuraciones de las redes: Profibus, Ethernet/Profinet, AS-i y el protocolo de comunicación Modbus RTU RS 485, la topología y configuración para la trasmisión de datos entre la PC y dispositivos electrónicos que constituyen la integración de redes industriales. Creada la comunicación entre la PC y cada uno de los dispositivos electrónicos que constituyen el módulo de redes industriales se procede a programar un dispositivo a la vez. La integración de redes está diseñada para la transferencia de datos de control y monitoreo entre las estaciones maestro-esclavo, la integración se la realizo con procesos ya existentes en el laboratorio de Control y Manipulación Automática de la Escuela de Ingeniera de Mantenimiento, la estación que trabaja como maestro sería una PC (Sotfware LabVIEW), el cual se encarga de enviar y recibir señales de escritura y lectura procedentes de las estaciones esclavos. Se realizaron las pruebas de funcionamiento de la transferencia de datos en la red de comunicación maestro esclavo: LabVIEW entre PLC MASTER S7 1200 (SIEMENS) y PLC SLAVE S7 1200, MODBUS RTU – PLC S7 1200 (SIEMENS) Y LabVIEW por medio del serial RS 485 Y OPC, cabe recalcar que en todos los casos el software LabVIEW hace de maestro en la red. Previo a la manipulación del módulo se recomienda una correcta familiarización del uso de todos los elementos que se ha utilizado en el desarrollo de este trabajo.
URI : http://dspace.espoch.edu.ec/handle/123456789/9867
Aparece en las colecciones: Ingeniero de Mantenimiento; Ingeniero/a en Mantenimiento Industrial

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
25T00337.pdf6,34 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons