Por favor, use este identificador para citar o enlazar este ítem:
http://dspace.espoch.edu.ec/handle/123456789/5813
Registro completo de metadatos
Campo DC | Valor | Lengua/Idioma |
---|---|---|
dc.contributor.advisor | Villagrán Cáceres, Javier | - |
dc.contributor.author | Jaramillo Garzón, Humberto Jesús | - |
dc.contributor.author | Quito García, Jhonnatan Patricio | - |
dc.date.accessioned | 2017-01-19T13:15:17Z | - |
dc.date.available | 2017-01-19T13:15:17Z | - |
dc.date.issued | 2016-11-25 | - |
dc.identifier.citation | Jaramillo Garzón, Humberto Jesús; Quito García, Jhonnatan Patricio. (2016). Implementación de un módulo de instrumentación para medir y controlar variables de presión, temperatura, caudal y nivel, en el laboratorio de automatización industrial en la Facultad de Mecánica de la ESPOCH. Escuela Superior Politécnica de Chimborazo. Riobamba. | es_ES |
dc.identifier.uri | http://dspace.espoch.edu.ec/handle/123456789/5813 | - |
dc.description | El presente trabajo de titulación contiene el desarrollo y la elaboración del módulo de instrumentación que será implementado para el laboratorio de automatización industrial de la Facultad de Mecánica, que será utilizado, para controlar y medir las variables de presión, temperatura, caudal y nivel de un sistema de fluido, utilizando tecnología innovadora simulando procesos industriales. Se aplicó el método deductivo para obtener las variables físicas ya establecidas en el presente trabajo, que fue comprobada su validez mediante la conexión de diferentes sensores. Los diferentes dispositivos y elementos fueron programados en el software Arduino que permite una comunicación analógica de los sensores, obteniendo resultados digitales en las pantallas de control del módulo de instrumentación y mediante prácticas de medición de presión, temperatura, caudal y nivel, fueron analizadas directamente por cada uno de los sensores obteniendo valores en tiempo real y de forma continua sin existir la presencia de riesgos del usuario. El módulo de instrumentación demuestra ser confiable y seguro, puesto que es capaz de controlar y medir las cuatro variables y simular un proceso industrial y adicionalmente se recomienda que el usuario debe tener previos conocimientos para manipular todos los elementos que fueron incorporados para el módulo de instrumentación. | es_ES |
dc.description.abstract | The present degree contains the development and elaboration of the instrumentation module that will be implemented for the industrial automation laboratory of the Faculty of Mechanics, which will be used to control and measure the variables of pressure, temperature, tail and level of a system of fluid using innovative technology simulating industrial processes. The deductive method was applied to obtain the physical variables already established in the present research, its validity was verified by connecting different sensors. The different devices and elements were programmed in the Arduino software that allows an analog communication of the sensors, obtaining digital results in the control screens of the instrumentation module and trough practices of measurement of pressure, temperature, flow and level, were analyzed directly by each of the sensors obtaining values in real time and continuously without the existence of risks of the user. The instrumentation module proves to be reliable and safe since it is able to control and measure the four variables and simulate an industrial process and additionally it is recommended that the user must have previous knowledge to manipulate all the elements that were incorporated for the instrumentation module. | es_ES |
dc.language.iso | spa | es_ES |
dc.publisher | Escuela Superior Politécnica de Chimborazo | es_ES |
dc.relation.ispartofseries | UDFM;25T00277 | - |
dc.subject | MILIVOLTIOS (MV) | es_ES |
dc.subject | INGENIERÍA DE SOFTWARE | es_ES |
dc.subject | FUERZA ELECTROMOTRIZ (F.E.M.) | es_ES |
dc.subject | MODULACIÓN POR ANCHO DE PULSO (PWM) | es_ES |
dc.subject | VOLTAJE DE CORRIENTE DIRECTA (VDC) | es_ES |
dc.subject | HOJA DE CÁLCULO | es_ES |
dc.subject | RIOBAMBA (CANTÓN) | es_ES |
dc.title | Implementación de un módulo de instrumentación para medir y controlar variables de presión, temperatura, caudal y nivel, en el laboratorio de automatización industrial en la Facultad de Mecánica de la ESPOCH. | es_ES |
dc.type | bachelorThesis | es_ES |
dc.contributor.miembrotribunal | Haro Medina, Marco Antonio | - |
Aparece en las colecciones: | Ingeniero de Mantenimiento; Ingeniero/a en Mantenimiento Industrial |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
25T00277.pdf | 3,12 MB | Adobe PDF | Visualizar/Abrir |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.