Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/6663
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorLeón, Gerardo-
dc.contributor.authorSabando Álvarez, Andrea Valeria-
dc.date.accessioned2017-06-22T15:19:51Z-
dc.date.available2017-06-22T15:19:51Z-
dc.date.issued2017-04-
dc.identifier.citationDiseño y construcción de un destilador solar para aguas residuales en la ciudad de Riobamba. Escuela Superior Politécnica de Chimborazo. Riobamba.es_ES
dc.identifier.urihttp://dspace.espoch.edu.ec/handle/123456789/6663-
dc.descriptionEl objetivo de la investigación fue diseñar y construir un destilador solar para el tratamiento de aguas residuales, en la ciudad de Riobamba, el mismo que se instaló en la estación meteorológica ubicada en la Escuela Superior Politécnica de Chimborazo. Se realizó el análisis de investigaciones realizadas para identificar procesos similares y establecer los parámetros de diseño y ecuaciones para obtener los valores teóricos y usarlo en la posterior construcción. Se utilizó acero inoxidable de calidad para uso en alimentos, en la construcción de la bandeja y canales que van a alojar el agua residual a ser tratada, para evitar contaminación de minerales provenientes de este material, la base se hizo de hierro por lo que no se necesitaba un material tan resistente siendo el soporte solo para la lana de vidrio que funcionó como aislante térmico para mantener una temperatura casi constante durante la destilación, la cubierta se realizó en vidrio de un espesor de 4 líneas a un ángulo de 30° de inclinación para obtener una buena recepción de la radiación solar y mediante esa inclinación se obtuvo el agua tratada por la condensación en el vidrio, la construcción se llevó a cabo en un taller en la ciudad de Riobamba. Se realizaron 3 distintas pruebas con tres tipos de aguas residuales (domestica-industrial, domestica e industrial). Se evaluó los parámetros más representativos físicos (turbiedad y color), químicos demanda bioquímica de oxígeno y demanda química de oxígeno (DBO5 y DQO) y microbiológicos (coliformes fecales y totales). Como valores de referencia para establecer el cumplimiento de normas se tomó la tabla 10 del libro 6 del TULSMA. Los resultados conseguidos permitieron concluir que el destilador solar tiene eficiencias; para aguas residuales (industrial y domestica) del 89.96%, agua residual domestica del 94.28% y de aguas residuales industriales del 99.31% de disminución de contaminantes, demostrando que el destilador solar es un método eficiente para tratar aguas residuales. Se recomienda utilizar volúmenes bajos de agua para una mayor eficiencia en tiempo de la destilación y un lavado previo al destilador para evitar contaminación al momento de cambiar el agua a destilar.es_ES
dc.description.abstractThe objective of the research was to design and construct a solar distiller for the waste water treatment, in the city of Riobamba, the same one that was installed in the meteorological station located at Escuela Superior Politécnica de Chimborazo. The analysis of research was carried out to identify similar processes and establish the design parameters and equations to obtain the theoretical values and use it in the subsequent construction. Quality stainless steel was adapted for food use, in the construction of the tray and canals that will house the waste water to be treated, to avoid contamination of minerals from this material, the base was made of iron so it was not necessary such a resistant material being the support only for the glass wool that functioned as thermal insulation to maintain an almost constant temperature during the distillation, The cover was made in glass of a thickness of 4 lines at an angle of 30 ° of inclination to obtain a good reception of the solar radiation and by that inclination the water treated by the condensation in the glass was obtained, The construction was carried out in a workshop in the city of Riobamba. Three different tests were implemented with three types of wastewater (domestic-industrial, domestic and industrial).The most representative physical parameters (turbidity and color), chemicals, biochemical oxygen demand and chemical oxygen demand (BOD5 and COD) as well as microbiological (fecal and total coliforms) were evaluated. Table 10 of book 6 of TULSMA, (Unified Text of the Secondary Legislation of the Ministry of Environment) was taken as reference values to establish the enforcement of standards. The obtained results allowed concluding that the solar distiller has efficiencies; for waste water (industrial and domestic) of 89.96%, domestic wastewater of 94.28% and industrial wastewater of 99.31of reduction of pollutants, demonstrating that solar distillation is an efficient method to treat wastewater. It is recommended to use low volumes of water for a greater efficiency in the time of the distillation and a previous wash to the distiller to avoid contamination when changing the water to be distilled.es_ES
dc.language.isospaes_ES
dc.publisherEscuela Superior Politécnica de Chimborazoes_ES
dc.relation.ispartofseriesUDCTFC;236T0265-
dc.subjectTECNOLOGÍA Y CIENCIAS DE LA INGENIERÍAes_ES
dc.subjectBIOTECNOLOGÍAes_ES
dc.subjectINGENIERÍA AMBIENTALes_ES
dc.subjectDESTILADOR SOLARes_ES
dc.subjectAGUA RESIDUALes_ES
dc.subjectAGUA TRATADAes_ES
dc.titleDiseño y construcción de un destilador solar para aguas residuales en la ciudad de Riobamba.es_ES
dc.typebachelorThesises_ES
dc.contributor.miembrotribunalGonzález, Juan Carlos-
Aparece en las colecciones: Ingeniero/a en Biotecnología Ambiental; Ingeniero/a Ambiental

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
236T0265.pdf3,89 MBAdobe PDFVista previa
Visualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.