Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/8852
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorAltamirano Santillán, Edwin Vinicio-
dc.contributor.authorCastelo Granizo, Adrián Alexis-
dc.date.accessioned2018-09-14T13:26:39Z-
dc.date.available2018-09-14T13:26:39Z-
dc.date.issued2017-07-
dc.identifier.citationCastelo Granizo, Adrián Alexis. (2017). Diseño e implementación de un sistema de control inalámbrico para el coche transportador-40t de la central Agoyán. Escuela Superior Politécnica de Chimborazo. Riobamba.es_ES
dc.identifier.urihttp://dspace.espoch.edu.ec/handle/123456789/8852-
dc.descriptionEl objetivo del presente trabajo de titulación fue diseñar e implementar un Sistema de Control Inalámbrico para el Coche Transportador de la Central Agoyán, para lo cual previamente se estudiaron las características y funcionamiento originales del coche. Al iniciar el desarrollo del proyecto se diseñó la topología de red adecuada para el nuevo sistema de control, posteriormente se seleccionaron los elementos electrónicos necesarios para implementar dicha topología teniendo el controlador lógico programable (PLC) S7-1200, el Access Point SCALANCE W786-1 y la interfaz hombre-máquina (HMI) inalámbrica IWLAN 277 como principales dispositivos dentro del sistema. Se procedió a la configuración de estos dispositivos logrando comunicarlos entre sí. A continuación, se diseñó el control inalámbrico necesario para poder reducir tiempos de trabajo en el proceso de transportación y alertar al operador sobre posibles fallos en el sistema. Con la ayuda del software TIA PORTAL se desarrollaron el bloque de programación para el PLC y las diferentes pantallas para la interfaz inalámbrica para posteriormente proceder con la implementación definitiva del nuevo sistema de control. Finalmente se realizaron las pruebas correspondientes para comparar el desempeño de los sistemas antiguo y nuevo bajo el parámetro de tiempos de trabajo, obteniéndose como resultado que con el nuevo sistema de control se consigue un ahorro de tiempo significativo en el proceso de transportación. Del proyecto realizado se concluye que el Sistema de Control Inalámbrico facilita la tarea de operación del Transportador ya que brinda mayor control y supervisión del proceso. Se recomienda la implementación de un sistema similar para el Puente Grúa de Casa de Máquinas de esta forma se puede crear un control integral para el sistema de Izaje de Casa de Máquinas.es_ES
dc.description.abstractThe objective of the present titling work was to design and implement a Wireless Control System for the conveyor car of the Agoyán Power Station, for which the original characteristics and functioning of the car were previously studied. At the beginning of the development of the project, the network topology was designed for the new control system. Afterwards, the electronic elements needed to implement the topology were selected, having the S7-1200 programmable logic controller (PLC), the SCALANCE W786-1 Access Point and the IWLAN 277 Wireless Human Machine Interface (HMI) as the main devices within the system. We proceeded to configure these devices and managed to communicate with each other. Next, the neccessary wireless control was designed to reduce working time in the transportation process and alert the operator to posible system failures. With the help of the TIA PORTAL software, the programming block for the PLC and the different screens for the wireless interface were developed, and then the definitive implementation of the new control system was carried out. Finally, the corresponding tests were performed to compare the performance of the old and new systems under the parameter of working times, obtaining as a result that the new control system achieves a significant time saving in the transportation process. The project concluded that the Wireless Control System facilitates the operation of the conveyor as it provides greater control and supervisión of the process. It is recommended the implementation of a similar system for the Bridge House Crane in this way can create an integral control for the hoisting system of House of Machines.es_ES
dc.language.isospaes_ES
dc.publisherEscuela Superior Politécnica de Chimborazoes_ES
dc.relation.ispartofseriesUDCTFIYE;108T0214-
dc.subjectTECNOLOGÍA Y CIENCIAS DE LA INGENIERÍAes_ES
dc.subjectINGENIERÍA Y TECNOLOGÍA ELECTRÓNICAes_ES
dc.subjectSISTEMA DE CONTROL INALÁMBRICOes_ES
dc.subjectPROCESO DE TRANSPORTACIÓNes_ES
dc.subjectCENTRAL AGOYÁNes_ES
dc.subjectTIA PORTAL (SOFTWARE)es_ES
dc.subjectEVALUACIÓN DE RENDIMIENTOes_ES
dc.subjectOPTIMIZACIÓN DE PROCESOS INDUSTRIALESes_ES
dc.titleDiseño e implementación de un sistema de control inalámbrico para el coche transportador-40t de la central Agoyán.es_ES
dc.typebachelorThesises_ES
dc.contributor.miembrotribunalVallejo Vallejo, Geovanny Estuardo-
Aparece en las colecciones: Ingeniero en Electrónica, Control y Redes Industriales; Ingeniero/a en Electrónica y Automatización

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
108T0214.pdf2,8 MBAdobe PDFVista previa
Visualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.