Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/9749
Título : Diseño de un plan integral de gestión de riesgos institucional para la Escuela de Física y Matemática de la Facultad de Ciencias de la Escuela Superior Politécnica de Chimborazo
Autor : Jara Calle, Gabriel Isaías
Director(es): Moyano Alulema, Julio Cesar
Tribunal (Tesis): Guamán Lozano, Ángel Geovanny
Palabras claves : TECNOLOGÍA Y CIENCIAS DE LA INGENIERÍA;RIESGOS INSTITUCIONALES;INCIDENTES;PLAN DE GESTIÓN DE RIESGOS;PREVENCIÓN;MATRIZ DE RIESGOS;SEGURIDAD LABORAL
Fecha de publicación : 27-jun-2018
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Jara Calle, Gabriel Isaías. (2018). Diseño de un plan integral de gestión de riesgos institucional para la Escuela de Física y Matemática de la Facultad de Ciencias de la Escuela Superior Politécnica de Chimborazo. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTFM;85T00514
Abstract : This degree work had the objective of designing a Comprehensive Institutional Risk Management Plan (PIGR) for the Physics and Mathematics School of the ESPOCH. From a preliminary observation it was determined that the corresponding measures were not applied to minimize the incidence of internal and external risks, this was confirmed with the random opinion of the different students and administrative, academic and support staff of the School, those who have said that there have been incidents in the place, that attempt against people integrity who work and visit the same. The lack of signage in the place is also notorious, in such a way that the possible risks were identified based on the Technical Secretary for Risk Management (SGR), proposed format, same which with the help of the labor risks matrix that was facilitated by the Ecuadorian Ministry of Labor (MRL) a thorough investigation and analysis of the risks and dangers present in the installations is carried out, it also uses indicators for the exposure level which is gotten with the help of technical data sheets with quantitative methodology as Technical Prevention Standards (NTP), for the identification of risks the multiple matrix of the National Institute of Occupational Safety and Hygiene (INSHT), and for its control will be used rules in force in the country, such as the executive order 2393, Resolution C.D. 513 of the Board of Directors of the Ecuadorian Social Security Institute (IESS), considering that the identification and analysis is specifically of the school's infrastructure. The general recommendations and technical manuals provided by National Fire Protection Association (NFPA) for the selection and location of fire-fighting equipment were also considered (ACI), with the sheet MESERI, methodology delivered by the fire department which is of execution and simple interpretation for the brigades and staff in general, in addition to the regulation INEN-ISO 3864 which specifies the colours and shapes corresponding to the appropriate signage for the facilities at the school in relation to the risks identified.
Resumen : En el presente trabajo de titulación tuvo el objetivo del diseño de un Plan Integral de Gestión de Riesgos Institucional (PIGR) para la Escuela de Física y Matemática de la ESPOCH. A partir de una observación preliminar se determinó que no se aplican las medidas correspondientes para minimizar la incidencia de riesgos internos y externos, esto se confirmó con la opinión al azar de los diferentes estudiantes y personal administrativo, académico y de apoyo de la Escuela, quienes han manifestado que se han suscitado incidentes en el lugar, que atentan contra la integridad de las personas que trabajan y visitan la misma. También es notoria la falta de señalética en el lugar, de tal forma que se pudo identificar los posibles riesgos basándonos en el formato planteado de la Secretaria de Gestión de riesgos (SGR), misma que con la ayuda de la matriz de riesgos laborales que nos facilita el Ministerio de Trabajo Ecuatoriano (MRL) se procede a realizar una investigación y análisis minucioso de los riesgos y peligros presentes en las instalaciones, así también empleando indicadores para el nivel de exposición que se tiene con la ayuda de fichas técnicas con metodología cuantitativa como normas técnicas de prevención (NTP), para la identificación de los riesgos la matriz múltiple del Instituto Nacional de Seguridad e Higiene en el Trabajo (INSHT), y para su control se emplearán normas vigentes en el país, como el Decreto Ejecutivo 2393, la Resolución CD-513 del Consejo Directivo del Instituto Ecuatoriano de Seguridad Social (IESS), considerando que la identificación y análisis es específicamente de la infraestructura de la Escuela. También se consideró las recomendaciones generales y manuales técnicos que nos facilita la NFPA para la selección y ubicación de equipos para el ataque contra incendios (ACI), con la ficha MESERI, metodología recomendada por el cuerpo de Bomberos que es de ejecución e interpretación sencilla para los brigadistas y personal en general, además de la normativa INEN-ISO 3864 la cual nos especifica los colores y formas correspondientes a la señalética adecuada para las instalaciones de la Escuela en relación a los riesgos identificados.
URI : http://dspace.espoch.edu.ec/handle/123456789/9749
Aparece en las colecciones: Ingeniero Industrial

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
85T00514.pdf3,13 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons