Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/15750
Título : Diseño e implementación de un Sistema Automático Compactador PET utilizando elementos hidráulicos.
Autor : Tipán, Rolando
Mora, Verónica
Altamirano, Edwin
Palabras claves : ARDUINO;BOTELLAS PLÁSTICAS;CELDAS DE CARGA;COMPACTADOR AUTOMÁTICO;HIDRÁULICA;LABVIEW;LOGO SIEMENS;SISTEMA AUTOMÁTICO PET;PLASTIC BOTTLE;LOAD CELLS;AUTOMATIC COMPACTOR;HYDRAULIC;AUTOMATIC SYSTEM
Fecha de publicación : 27-nov-2018
Editorial : Escuela Superior Politécnica de Chimborazo
Abstract : The main purpose of this degree work was to design and implement an automatic system of polyethylene terephthalate compactor (PET) by using a hydraulic system. The automatic compactor system is formed by the container structure, the electronic system, and a control system by software. The container was constructed of galvanized steel showing resistance to external agents such as water and humidity, which protects the integrity of the internal electronic systems. The electronic system; was formed by two controllers: the main controller Arduino One; was programmed to handle communication with the load cells, and then, it sends this information to the Siemens Logo secondary controller. This secondary controller is programmed to the control of hydraulic solenoid valves since they handle control signals of 24 Volts, by generating actions to the activation of the hydraulic cylinder that compacts the plastic bottles at a calibrated pressure of 700 Newton. The plastic bottles were compacted previously to their control to avoid the entrance of bottles of another material. The control system was developed in LabView where monitoring and control of the automatic system in real time were performed with a friendly interface for the user. The compaction of plastic bottles PET made possible to reduce the volume of each bottle by 58%, reducing the volume occupied by plastic waste, and facilitating the recycling process of plastic bottles. It is concluded that the use of hydraulic technology in the compaction system, generated a high level of constant hydraulic pressure in the cylinder, thus getting an appropriate response of the automatic system, since leaks or pressure losses at the time of compaction are not generated. It is recommended to incorporate a human machine interface (HMI) to the system enabling users to see the information generated by the system in real time.
Resumen : El presente trabajo tuvo como objetivo general diseñar e implementar un sistema automático compactador PET utilizando sistema hidráulico. El sistema automático compactador se compone de la estructura del contenedor, el sistema electrónico y el sistema de control por software. El contenedor se encuentra construido de Tol galvanizado el cual muestra resistencia a agentes externos como el agua y la humedad logrando así precautelar la integridad de los sistemas electrónicos internos, El sistema electrónico está conformado por dos controladores, el controlador principal Arduino Uno se encarga de manejar la comunicación con las celdas de carga para luego enviar dicha información al controlador secundario Logo Siemens el cual desempeña las funciones de control de las electroválvulas hidráulicas debido que manejan señales de control de 24 Voltios, generando las acciones para la activación del cilindro hidráulico que compacta las botellas plásticas a una presión calibrada de 700 Newton, las botellas plásticas son compactadas previo un control de ingreso para evitar el ingreso de botellas de otro material. El sistema de control desarrollado en LabView cuenta con una interfaz amigable para el usuario, donde se desarrollar tareas de monitoreo y control en tiempo real del sistema automático. Con la compactación de botellas plásticas PET se logra reducir en un 58% el volumen de cada botella, disminuyendo así el volumen ocupado por residuos plásticos y facilitando el proceso de reciclaje de botellas plásticas. Concluyendo que la utilización de tecnología hidráulica en el sistema de compactación obtuvo un alto nivel de presión hidráulica constante en el cilindro, teniendo así una respuesta adecuada del sistema automático, al no generar fugas ni perdidas de presión al momento de la compactación.
URI : http://dspace.espoch.edu.ec/handle/123456789/15750
Aparece en las colecciones: 2019 Vol. 1 (enero - junio)

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
perspe_v1_n1_04.pdf1,51 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons