Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/17266
Título : Implementación de un módulo térmico para mejorar las condiciones de confort del laboratorio de diagnóstico técnico y eficiencia energética de la Facultad de Mecánica
Autor : Vacacela Zurita, Mario Paúl
Caichug Morales, Kevin Paúl
Director(es): Calderón Freire, Edisson Fernando
Tribunal (Tesis): Tenicota García, Alex Giovanny
Palabras claves : TECNOLOGÍA Y CIENCIAS DE LA INGENIERÍA;MÓDULO TÉRMICO;CARGA TÉRMICA;CONFORT TÉRMICO;REFRIGERACIÓN;CALEFACCIÓN
Fecha de publicación : 8-jun-2022
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Vacacela Zurita, Mario Paúl; Caichug Morales, Kevin Paúl. (2022). Implementación de un módulo térmico para mejorar las condiciones de confort del laboratorio de diagnóstico técnico y eficiencia energética de la Facultad de Mecánica. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTFM;25T00473
Abstract : The objective of this research work was to implement a thermal module to improve comfort conditions in the Technical Diagnosis and Energy Efficiency Laboratory at Mechanics Faculty. It was proposed to strengthen knowledge about the operation of a refrigeration system. The development of the work included the calculation of the thermal load through the use of software, the selection of elements and equipment based on the cooling and heating load. They allowed the operation of the equipment as an air conditioner and the construction of the thermal module under the principle of operation of an ideal vapor compression refrigeration cycle. The laboratory guides for the thermal module, the operation manual and the maintenance plan were elaborated. By means of control elements, the performance tests were carried out where the thermal module works as a cooling or heating system, thus allowing a temperature variation in cooling mode of -3.4ºC in a time period of 24 minutes, obtaining thus, an ambient temperature in the laboratory of 20ºC. In the same way the operating tests were carried out in heating mode, obtaining a temperature variation of 4.3ºC in 20 minutes, achieving an ambient temperature in the laboratory of 28, 3ºC. It is concluded that the built thermal module maintains an ambient temperature in the laboratory of 20ºC in cooling mode and a temperature of 28.3ºC in heating mode. Using the laboratory guides the understanding of a basic refrigeration system was helped, knowing its main components, its principle of operation and what are its possible failures and breakdowns. For greater module efficiency, greater thermal insulation is recommended to prevent the entry of external temperatures of laboratory.
Resumen : El presente trabajo de titulación tuvo como objetivo implementar un módulo térmico para mejorar las condiciones de confort en el Laboratorio de Diagnóstico Técnico y Eficiencia Energética de la Facultad de Mecánica, planteado para fortalecer conocimientos acerca del funcionamiento de un sistema de refrigeración. El desarrollo del trabajo comprendió el cálculo de la carga térmica mediante el uso de un software, la selección de elementos y equipos en base a la carga de refrigeración y calefacción que permitieron el funcionamiento del equipo como un climatizador y la construcción del módulo térmico bajo el principio de funcionamiento de un ciclo ideal de refrigeración por compresión de vapor, se elaboró las guías de laboratorio para el módulo térmico, el manual de operación y el plan de mantenimiento. Por medio de elementos de control se realizó las pruebas de funcionamiento en donde el módulo térmico trabaja como un sistema de refrigeración o calefacción, permitiendo así una variación de temperatura en modo refrigeración de -3,4ºC en un lapso de tiempo de 24 minutos, obteniendo así una temperatura ambiente en el laboratorio de 20ºC, de la misma manera se realizó las pruebas de funcionamiento en modo calefacción, obteniendo una variación de temperatura de 4,3ºC en un tiempo de 20 minutos, logrando una temperatura ambiente en el laboratorio de 28,3ºC. Se concluye que el módulo térmico construido mantiene una temperatura ambiente en el laboratorio de 20ºC en modo refrigeración y una temperatura de 28,3ºC en modo calefacción y por medio de las guías de laboratorio se ayudó a la comprensión de un sistema básico de refrigeración, conociendo sus componentes principales, su principio de funcionamiento y cuáles son sus posibles fallas y averías. Para mayor eficiencia del módulo es recomendable un mayor aislamiento térmico para evitar el ingreso de temperaturas externas dentro del laboratorio.
URI : http://dspace.espoch.edu.ec/handle/123456789/17266
Aparece en las colecciones: Ingeniero de Mantenimiento; Ingeniero/a en Mantenimiento Industrial

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
25T00473.pdf4,55 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons