Por favor, use este identificador para citar o enlazar este ítem: http://dspace.espoch.edu.ec/handle/123456789/19194
Título : Repotenciación del sistema de calentamiento del agua de la piscina cubierta del Complejo Turístico Los Elenes del cantón Guano
Autor : Jiménez López, Ricardo Alexander
Director(es): Buenaño Moyano, Luis Fernando
Tribunal (Tesis): Chuquin Vasco, Nelson Santiago
Palabras claves : TECNOLOGÍA Y CIENCIAS DE LA INGENIERÍA;SISTEMA DE CALENTAMIENTO DE AGUA;CALDERO PIROTUBULAR;MANTENIMIENTO CORRECTIVO;CÁMARA TERMOGRÁFICA;TEMPORIZADOR
Fecha de publicación : 12-jun-2023
Editorial : Escuela Superior Politécnica de Chimborazo
Citación : Jiménez López, Ricardo Alexander. (2023). Repotenciación del sistema de calentamiento del agua de la piscina cubierta del Complejo Turístico Los Elenes del cantón Guano. Escuela Superior Politécnica de Chimborazo. Riobamba.
Identificador : UDCTFM;15T00856
Abstract : The objective of this technical work was to repower the water heating system of the indoor pool of the Los Elenes Tourist Complex in the Guano canton, so that it presents better efficiency. The technical work was divided into three axes of intervention: system maintenance, energy evaluation and automation of the ignition system. Within the maintenance, as an initial point was to verify the state of the equipment present in the heating system which are: fire tube cauldron, burner and electrical system, once the elements were identified, the classification was carried out according to their risk priority number (NPR) to determine existing and potential failures, in addition to establishing a high, low, and medium priority level, to then proceed with preventive and corrective maintenance work. The second axis referring to energy evaluation began with a non-invasive analysis of the boiler by measuring temperatures and gas concentration using a thermographic camera, a digital pyrometer and a flue gas analyzer, which can obtain data without stopping the process. of heating, obtaining real data that served to determine the energy losses that the boiler presents and solving them by isolating the critical points of loss of calorific power. Finally, the third axis in which the automation of the ignition system was carried out, since the ignition of the burner was done manually, hindering the heating processes and reducing the efficiency of the system, through the implementation of a timer schedules were established. proper ignition and shutdown of the burner thus improving the productivity of the process. It is concluded that the work carried out in the three axes of intervention improved the efficiency of the heating system in production and in effectiveness, since fuel savings were also recorded.
Resumen : El presente trabajo técnico tuvo como objetivo repotenciar el sistema de calentamiento de agua de la piscina cubierta del Complejo Turístico Los Elenes del cantón Guano, para que éste presente una mejor eficiencia. Se dividió el trabajo técnico en tres ejes de intervención: mantenimiento del sistema, evaluación energética y automatización del sistema de encendido. Dentro del mantenimiento como punto inicial fue constatar el estado de los equipos presentes en el sistema de calentamiento los cuales son: caldero pirotubular, quemador y sistema eléctrico, una vez identificados los elementos se realizó la clasificación de acuerdo con su número prioritario de riesgo (NPR) para determinar las fallas existentes y las potenciales, además de establecer un nivel prioritario alto, bajo y medio, para luego proceder con los trabajos de mantenimiento preventivo y correctivo. El segundo eje referente a la evaluación energética inició con un análisis no invasivo de la caldera mediante la medición de temperaturas y concentración de gases usando una cámara termográfica, un pirómetro digital y un analizador de gases de combustión los cuales pueden obtener datos sin detener el proceso de calentamiento, obteniendo datos reales que sirvieron para determinar las pérdidas energéticas que presenta la caldera y solucionándolas mediante un aislamiento de los puntos críticos de pérdida de potencia calorífica. Por último, el tercer eje en el cual se realizó la automatización del sistema de encendido, ya que el encendido del quemador se lo realizaba de manera manual entorpeciendo los procesos de calentamiento y mermándole eficiencia al sistema, mediante la implementación de un temporizador se establecieron horarios de encendido y apagado adecuados del quemador mejorando así la productividad del proceso. Se concluye que los trabajos realizados en los tres ejes de intervención mejoraron la eficiencia del sistema de calentamiento en producción y en efectividad pues también se registró un ahorro del combustible.
URI : http://dspace.espoch.edu.ec/handle/123456789/19194
Aparece en las colecciones: Ingeniero/a Mecánico/a

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
15T00856.pdf3,41 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons